Interpretation ID: 3320o
Office of the General Counsel
General Motors Corporation
New Center One Building
3031 West Grand Boulevard
P.O. Box 33122
Detroit, MI 48232
Dear Mr. Ball:
This responds to your letter seeking our opinion as to whether a new minivan GM plans to introduce (referred to as the GM 200 minivans in your letter) could be classified as a "multipurpose passenger vehicle" for the purposes of the Federal Motor Vehicle Safety Standards. In your letter, you indicated GM's belief that this new minivan should be classified as a multipurpose passenger vehicle, because it will be constructed on a truck chassis.
Your company has concluded that this minivan will be constructed on a truck chassis for several reasons. First, you state that this chassis has "truck attributes" that make it more suitable for commercial use than a passenger car chassis would be. The examples of such truck attributes set forth in your letter were an integrated ladder-type frame with full-length longitudinal rails and supporting cross-members, an extended width rear axle, a powertrain certified as complying with the light-duty truck emissions standards, and a flat load floor. Second, you state the chassis is a truck chassis because a cargo van version of this vehicle will be marketed and sold for commercial use. Third, you provided an analysis showing that this minivan will have certain chassis and body characteristics similar to those characteristics of minivans that are now produced and classified as multipurpose passenger vehicles.
At the outset, I would like to make clear that the National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1381 et seq.) places the responsibility for classifying a particular vehicle in the first instance on its manufacturer. For this reason, NHTSA does not approve or endorse any vehicle classifications before the manufacturer itself has classified a particular vehicle. NHTSA may reexamine the manufacturer's classification in the course of any enforcement actions. We will, however, tentatively state how we believe we would classify this vehicle for the purposes of the safety standards. It is important for GM to be aware that these tentative statements of classification are based entirely on the information presented to the agency by GM, and the tentative classifications may change after NHTSA has had an opportunity to examine the vehicle itself or otherwise acquire additional information about the vehicle.
With those caveats, we believe that the GM 200 minivan family could be classified as a multipurpose passenger vehicle for the purposes of the safety standards, because it will be constructed on a truck chassis. The fact that a cargo van version of the GM 200 will be marketed and sold for commercial use is evidence that the common chassis is a truck chassis. Additionally, the front to rear longitudinal side rails and supporting cross-members that are not present on the A-car chassis shows the GM 200 minivan chassis design is more suitable for heavy duty, commercial operations than the A-car chassis. Finally, the characteristics of the GM 200 chassis appear to be similar to the characteristics of other chassis that have been identified as "truck chassis" by their manufacturers. Accordingly, assuming that your description of the GM 200 chassis is accurate, it appears to us that this minivan is constructed on a truck chassis.
The version of your letter to me that has been placed in the public docket has all the information for which you requested confidential treatment deleted from it.
Sincerely,
Erika Z. Jones Chief Counsel
ref:571 d:l2/2l/88