Interpretation ID: 7514
Account Executive
Entran Devices, Inc.
10 Washington Avenue
Fairfield, NJ 07004
Dear Mr. Schwartz:
This responds to your request for an interpretation of 49 CFR Part 572, Anthropomorphic Test Dummies. Specifically, you were interested in the provisions for the Hybrid III test dummy set forth in Subpart E of Part 572. You noted that 572.36(g) provides that the thorax and knee impactor accelerometers "shall have the dimensions and characteristics of Endevco Model 7231c or equivalent." You provided a sheet setting forth dimensional and electrical response information for an accelerometer model produced by your company, the Entran EGE-72C-750. You then asked if the Entran EGE-72C-750 was "equivalent" to the Endevco Model 7231c, within the meaning of 572.36(g). I am pleased to have this opportunity to explain our regulation for you.
Part 572 sets forth specifications with which all test dummies must comply if those dummies are to be used in this agency's compliance testing. In NHTSA's compliance testing to date, we have used only the Endevco Model 7231c for the thorax and knee impactor accelerometers. This should not be misinterpreted as suggesting that this agency believes that only this particular make and model of accelerometer will perform acceptably in compliance testing. Instead, it means that the agency has found that the Endevco Model 7231c performs acceptably in the intended shock environment, in terms of frequency response characteristics, damping, linearity, transverse sensitivity, reliability, repeatability, durability, etc.
The dictionary defines "equivalent" as "equal in value, measure, force, effect, significance, etc." As noted above, NHTSA has used only the Endevco Model 7231c for the thorax and knee impactor accelerometers in the compliance testing to date. Thus, the agency has not made any determination of which accelerometers are equivalent to the Endevco Model 7231c. Until such time as the agency makes a determination about equivalent accelerometers, the issue of equivalency of your EGE-72C-750 model and the specified accelerometer model is a matter to be worked out between your company and prospective users of your company's accelerometers. As long as you can satisfy prospective users about the equivalence of your company's accelerometers, NHTSA will not review the use of any particular accelerometers in certification testing, unless the test results indicate a problem or problems caused by those accelerometers.
I hope this information is helpful. If you have any further questions or need some additional information on this subject, please feel free to contact Steve Kratzke of my staff at this address or by telephone at (202) 366-2992.
Sincerely,
Paul Jackson Rice Chief Counsel
ref:572 d:29/92