Interpretation ID: 8292
Industry Standards & Government Regulations
Michelin
Post Office Box 2501
Greenville, SC 29602
Dear Mr. White:
This responds to your letter asking the National Highway Traffic Safety Administration (NHTSA) to clarify our certification procedures for the information of some of your customers. Specifically, you stated that some customers believe that you are required to test your tires for compliance with the Federal motor vehicle safety standards (FMVSS) and the Uniform Tire Quality Grading Standards (UTQGS), and that this agency then certifies your tires after reviewing and evaluating your test results.
Those impressions are incorrect. All new tires sold in the United States for use on passenger cars must be certified by the manufacturer as complying with FMVSS 109, New pneumatic tires, found at 49 CFR 571.109, while all new tires sold for use on motor vehicles other than passenger cars must be certified as complying with FMVSS 119, New pneumatic tires for vehicles other than passenger cars, found at 49 CFR 571.119. The National Traffic and Motor Vehicle Safety Act, 15 U.S.C. 1381, et seq. (Safety Act) establishes a self-certification procedure applicable to new motor vehicles and new items of motor vehicle equipment, which includes tires. This means that the tire manufacturer, and not a governmental agency such as NHTSA, certifies that its tires comply with applicable FMVSSs. Each new tire must be certified as meeting the applicable FMVSSs regardless of whether the tire meets an equal or higher standard in another country.
The UTQGS are set forth in 49 CFR 575.104. Those standards do not require certification in the same manner as the FMVSSs. The UTQGS require that manufacturers mold onto or into the sidewalls of their tires the comparative ratings of those tires for treadwear, traction, and temperature resistance for the use and benefit of consumers. Again, that is the manufacturers' responsibility and NHTSA neither reviews nor approves the ratings prior to their assignments by the manufacturers.
Neither the Safety Act nor NHTSA standards and regulations require that a manufacturer base its certifications on any specific tests, any number of specified tests or, for that matter, any tests at all. A manufacturer is only required to exercise due care in certifying its tires. It is the responsibility of each tire manufacturer to determine initially what test results, computer simulations, engineering analyses, or other information it needs to enable it to certify that its tires comply with applicable Federal safety standards. Once a manufacturer has determined that its tires meet all applicable Federal safety standards, it certifies such compliance by molding the letters "DOT" onto at least one sidewall of each certified tire. If manufacturers conduct any tests, they are not required by Federal law or regulation to release their test results to the public.
This agency does not perform any pre-sale testing, approval, or certification of tires, whether of foreign or domestic manufacture, before introduction into the U. S. retail market. Similarly, NHTSA does not approve or certify manufacturers' test results. Rather, NHTSA randomly tests certified tires to determine whether the tires do, in fact, comply with applicable standards. For such enforcement checks, NHTSA purchases tires "off the shelf" from retail tire dealers and tests those tires according to the procedures specified in the standards. If the tires pass the tests, no further action is taken. If they fail the tests and are determined not to comply with any applicable standard or standards, the manufacturer is responsible for recalling the tires and remedying the noncompliance without charge to the consumer. Government compliance test results are available to the public upon request from the NHTSA Technical Reference Division (NAD 52), 400 Seventh Street SW, Room 5108, Washington, D.C. 20590; (202) 366-2768.
I hope this information will assist you in clarifying tire certification requirements to the satisfaction of your customers. If you have any further questions or desire further clarification, please feel free to contact Walter Myers of my staff at this address or at (202) 366-2992.
Sincerely,
John Womack Acting Chief Counsel
ref:#109#119#575 d:4/27/93