Interpretation ID: 9465
Sales Representative
Anita's Auto World
529 S. Charles Street
Lansing, MI 48912
Dear Mr. Marczynski:
This responds to your letter in which you asked whether it would be legal for you to install after-market roll pans and convertible tops on light duty pick-up trucks. I apologize for the delay in our response.
By way of background information, the National Highway Traffic Safety Administration (NHTSA) is authorized under the National Traffic and Motor Vehicle Safety Act (the Safety Act) to issue Federal motor vehicle safety standards that apply to the manufacture and sale of new motor vehicles and new items of motor vehicle equipment. The Safety Act prohibits any person from manufacturing, introducing into commerce, selling, or importing any new motor vehicle or item of motor vehicle equipment unless the vehicle or equipment item is in conformity with all applicable safety standards.
After a vehicle's first purchase for purposes other than resale, i.e., the first retail sale of the vehicle, the presence and condition of devices or elements of design installed in the vehicle under applicable safety standards is affected by a section 108(a)(2)(A) of the Safety Act which provides:
No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or in part, any device or element of design installed on or in a motor vehicle ... in compliance with an applicable Federal motor vehicle safety standard.
In general, this provision prohibits any manufacturer, dealer, distributor, or repair shop from removing, disabling, or otherwise "rendering inoperative" any of the safety systems or devices installed on the vehicle to comply with a safety standard. However, modifications that change a vehicle from one vehicle type to another (e.g., from a hard-top to a convertible) do not violate the "render inoperative"
prohibition as long as the converted vehicle complies with the safety standards that would have applied if the vehicle had been originally manufactured as the new type.
NHTSA has exercised its authority to establish four safety standards which have different requirements for convertible trucks: Standard No. 205, Glazing Materials, Standard No. 208, Occupant Crash Protection, Standard No. 216, Roof Crush Resistance, and Standard No. 302, Flammability of Interior Materials. An explanation of these differences follows.
Standard No. 205
Standard No. 205 specifies requirements for glazing materials used in motor vehicles. Material used in a convertible top may be subject to this standard.
Standard No. 208
Standard No. 208 sets forth requirements for occupant protection at the various seating positions in vehicles. These requirements differ depending on gross vehicle weight rating (GVWR) and year of manufacture. The requirements for hard-top and convertible vehicles manufactured in the same year may also differ.
Standard No. 216
Multipurpose passenger vehicles, trucks and buses with a GVWR of 6,000 pounds or less, manufactured on or after September 1, 1994, are required to comply with Standard No. 216. However, Standard No. 216 does not apply to convertibles.
Standard No. 302
Standard No. 302 specifies burn resistance requirements for materials used in the occupant compartment of motor vehicles. Material used in a convertible top may be subject to this standard.
In summary, you are responsible for ensuring that, in the process of installing a roll pan or convertible top, you do not remove, disable, or otherwise "render inoperative" any of the safety systems or devices installed on the vehicle to comply with a safety standard. However, to the extent that a different standard is applicable to convertibles, modifications which result in the vehicle complying with the standard that applied to convertibles are permitted.
I hope you find this information helpful. If you have any other questions, please contact Mary Versailles of my staff at this address or by phone at (202) 366-2992.
Sincerely,
John Womack Acting Chief Counsel
ref:VSA#108#205#208#216#302 d:6/3/94