Skip to main content
Search Interpretations

Interpretation ID: aiam0053

Mr. Gordon F. Lee, Vice President, Badger Auto Body Company, 415 S. Third Street, Milwaukee, WI 53204; Mr. Gordon F. Lee
Vice President
Badger Auto Body Company
415 S. Third Street
Milwaukee
WI 53204;

Dear Mr. Lee: Thank you for your cooperation and response to the Federal Highwa Administration request regarding the 'Certification Requirements.'; The information you have provided will be very useful to us, however in accordance with Section 112 of the National Traffic and Motor Vehicle Safety Act of 1966, it would be appreciated if you would provide us with information as to where your tag will be located on your vehicles and also the serial identification system as requested in order that vehicles manufactured (complete) after January 1, 1968, can be identified.; In regard to your question as to whether there is an exception to th law regarding the placement of the three light markers at the rear of your vehicle because of the limited space on your rear frame, the answer is there is no exception and adherence is required. One possible solution to your problem might be to mount an additional bracket to mount the cluster of lights. This is only a suggestion and you may be able to arrive at a more practical arrangement.; Trusting this information answers your questions. Sincerely, Joseph R. O'Gorman, Acting Director, Office of Performanc Analysis, Motor Vehicle Safety Performance Service;