Interpretation ID: aiam0152
Factory Engineer
Nissan Motor Corporation
400 County Avenue
Secaucus
NJ 07094;
Dear Mr. Mizuno:#Thank you for your letter of March 7, 1969, to Dr William Haddon, Jr., concerning the location and the identification of the windshield washer switch on the steering column.#The system as you describe it appears to conform to Federal Motor Vehicle Safety Standard No. 101, however, the Bureau does not issue approvals of any specific system, and the development of equipment to comply with the standard is the responsibility of the individual manufacturer.#In reference to your second question about the identification of the windshield washer switch, Paragraph S3.2 reads, in part, '.... The following controls, when mounted on the instrument panel, shall be identified to permit recognition -- >>>... (c) Windshield Washing System, ....'<<<#This section of the regulation does not apply to the identification of controls in any position other than on the instrument panel.#Sincerely, Charles A. Baker, Office of Standards on Accident Avoidance, Motor Vehicle Safety Performance Service;