Interpretation ID: aiam0411
System Safety Engineer
Oshkosh Truck Corporation
P.O. Box 560
Oshkosh
WI 54901;
Dear Mr. Meton: By letter of May 11, 1971, you requested our opinion as to how Standar No. 207, Seating Systems, would apply to a seating system in which the seat belt is attached, to an eyebolt anchored on the seat frame and the eyebolt, in turn, is anchored by another length of webbing to the floor. The evident purpose of such a method attachment on suspension-type seats is to eliminate the shocks which would otherwise be transmitted to the occupant and to augment the strength of the seat, which might be unable by itself to withstand the occupant's weight in a crash.; As you correctly indicate in your letter, a system in which the belt i attached only to the floor requires a force under S4.2(a) and S4.2(b) of 20 times the weight of the seat in a forward and rearward direction, while a system with a lap belt anchored to the seat requires in addition, a force of 5000 pounds to be applied simultaneously to the seat belt in accordance with Standard No. 210 (S4.2(c)). It is our opinion that the hybrid seat belt installation shown by Oshkosh will be likely to impose significant loads on the seating system in the event of a crash, and that it should therefore be treated under S4.2(c) as a system with a seat mounted belt. The webbing running from the eyebolt to the floor is considered to be a part of the seat anchorage and should be employed during the test.; If you have further questions, please advise us. Sincerely, Lawrence R. Schneider, Acting Chief Counsel