Skip to main content
Search Interpretations

Interpretation ID: aiam1888

Honorable Birch Bayh, United States Senate, Washington, DC 20510; Honorable Birch Bayh
United States Senate
Washington
DC 20510;

Dear Senator Bayh: This is in response to your letter requesting information concernin correspondence from Mr. James A. Graham, commenting on a proposed amendment to the Federal bumper standard.; On January 2, 1975, the National Highway Traffic Safety Administratio (NHTSA) issued a *Federal Register* notice (copy enclosed) proposing to reduce the current 5-mph bumper impact requirements to 2.5 mph until the 1979 model year. The impact requirements would have been increased to 4 mph for 1979 and later model year cars.; The proposal was based primarily on the results of two agency-sponsore studies which indicated that the cost and weight of many current production bumpers, in light of inflation and fuel shortages, made the bumpers no longer cost beneficial. Information presented at public hearings on the bumper notice and comments submitted to the docket in response to the proposal have brought to light additional data. The NHTSA has carefully examined all of this evidence and reviewed its studies in light of the new information. As a result, the agency has concluded that the 5 mph protection level should not be reduced. This decision is contained in a *Federal Register* notice that was published on March 12, 1975 (Docket No. 74-11, Notice 7, Docket No. 73-19, Notice 6).; In his letter Mr. Graham objects to the standard's regulation o surface damage, such as dents, stating that this is not the type of damage which should be addressed by an agency developing safety standards. The surface damage criteria are proposed as part of a standard being promulgated under Title I of the Motor Vehicle Information and Cost Savings Act (Pub. L. 92-513). The Cost Savings Act directs the National Highway Traffic Safety Administration to develop a bumper standard that will obtain the maximum feasible reduction of costs to the public and the consumer. As such, the standard is not to be limited to affecting safety-related damage. Factors such as insurance costs and consumer time and inconvenience are to be considered in the rulemaking as well.; Mr. Graham's comments will be placed in the public docket where the will receive every consideration.; We appreciate your interest and that of Mr. Graham in this area o motor vehicle safety and performance.; Sincerely, Robert L. Carter, Associate Administrator, Motor Vehicl Programs;