Interpretation ID: aiam2621
Vice President - Technical Operations
Timpte
Inc.
5990 N. Washington Street
Denver
CO 80216;
Dear Mr. Gromer: This responds to your May 6, 1977, letter asking whether your tir information label complies with the requirements of Standard No. 120, *Tire Selection and Rims for Motor Vehicles Other Than Passenger Cars, and Part 567, *Certification*. Further, you request that the National Highway Traffic Safety Administration (NHTSA) expedite treatment of Docket No. 73-31, Notice 1, which, if implemented would simplify the certification and information labels.; Concerning Docket 73- 31, the NHTSA published on June 20, 1977, notice (42 FR 31161) implementing Notice 1 which proposed the use of the designation 'all axles' rather than listing each axle individually on the certification label. The implementation of this regulation should resolve many of your problems.; Regarding the sample information label you submitted with your letter the NHTSA does not give advance approvals of compliance with Federal safety regulations or standards. We will, however, give an informal opinion of whether your label appears to comply with the requirements. The label you submitted does not appear to comply with the requirements of Part 567 or Standard No. 120. I have enclosed copies of both of these regulations for your information.; Your certification label should use the designation 'all axles' no 'each axle.' The tire and rim information should follow that designation stated in the form presented in the examples in Standard No. 120 and Part 567.; Sincerely, Joseph J. Levin, Jr., Chief Counsel