Interpretation ID: aiam2718
Director of Finance
Hendrickson Mfg. Co.
8001 West Forty-Seventh Street
Lyons
IL 60534;
Dear Ms. Orth: This responds to your October 25, 1977, letter and subsequen conversation with Roger Tilton of my staff asking several hypothetical questions concerning the date of manufacture of vehicles and the applicability of Federal motor vehicle safety standards to those vehicles.; The National Highway Traffic Safety Administration (NHTSA) i interested in the compliance of motor vehicles with safety standards. The agency does not regulate the model year designation of vehicles. You should note that sale as 'new' of a vehicle, which for our purposes is 'used,' is regulated in many instances by the States. Further, you should consult the Federal Trade Commission with respect to the legality of calling such vehicles new, since that agency is concerned with any consumer fraud that might arise when a vehicle with used parts is sold as a new vehicle.; In your conversation with Mr. Tilton, you stated that you might alte the dates on the certificates of title for the chassis mentioned in your first question. This alteration would change, for example, a 1975 manufacturing date on the chassis title documents to a 1977 manufacturing date. I strongly urge you to obtain legal advice on the practice of altering the dates on these documents.; With respect to the application of Federal safety standards to you vehicles, you ask whether several vehicle chassis manufactured in previous years can be used in the manufacture of new 1977 motor vehicles. For purposes of the applicability of Federal safety standards, a manufacturer is permitted to select as the date of manufacture of a vehicle, the date of manufacture of the chassis, the date of manufacture of the completed vehicle, or any date between those two dates (Volume 49, Code of Federal Regulations, Part 568, *Vehicles Manufactured in Two or More Stages*). Therefore, for a chassis manufactured in previous years and subsequently included in a completed vehicle, the manufacturer has some freedom in the selection of the manufacturing date of the final vehicle. The date of manufacture of the vehicle, as chosen by the manufacturer, would be the date upon which the applicability of all safety standards would be judged, including those applicable to the chassis.; You should note that your Crane Chassis and Yard Tractor may not hav to comply with our requirements regardless of the date of their manufacture. The NHTSA's regulations apply only to motor vehicles which are primarily for use on the public streets, roads, and highways. Accordingly, vehicles designed for off-road use do not have to comply with the agency's requirements. The determination of whether a vehicle is an off-road vehicle depends upon its use. I have enclosed an interpretive letter that describes the criteria for determining which vehicles are motor vehicles under the National Traffic and Motor Vehicle Safety Act (Pub. L. 89- 563).; In your final two questions you ask whether our regulations applicabl to glider kits and to rebuilt tractors allow you to consider those vehicles 'used' for the purposes of compliance with Federal safety standards, but 'new' for purposes of their sale. Our glider kit regulation, Part 571.7(3), and our regulations concerning combining new and used components in trailers, Part 571.7(f), describe the limited circumstances under which reconstructed vehicles are not required to meet new motor vehicle safety standards. If the vehicles you reference meet the guidelines established in Parts 571.7(e) and (f) they will not be considered new motor vehicles for purposes of application of Federal motor vehicle safety standards.; I trust that this fully responds to your questions. Sincerely, Joseph J. Levin, Jr., Chief Counsel