Interpretation ID: aiam3290
Donald Boyd & Associates
Inc.
5617 W. 6th Street
Stillwater
OK 74074;
Dear Mr. Boyd: This responds to your recent letter requesting confirmation that larg commercial truck tractors do not have to comply with Federal Motor Vehicle Safety Standard No. 216, *Roof Crush Resistance*. You also asked whether large trucks should be designed to comply with the 'belt system' option under Safety Standard No. 208, *Occupant Crash Protection*.; You are correct in your assumption that large commercial trucks woul not have to comply with Safety Standard No. 216 since that standard only applies to passenger cars. You are also correct in stating that trucks with a GVWR greater than 10,000 pounds may meet the seat belt option of Safety Standard No. 208 found in paragraph S4.3.2 Under S4.3.1, manufacturers do have the option of meeting the crash protection requirements of S5 by means that require no action by vehicle occupants (with current technology this means air cushion restraints or automatic seat belts). Further, vehicles manufactured prior to August 15, 1977, were permitted to comply with Safety Standard No. 216 in lieu of the 'rollover' requirements of Standard No. 208, and for large trucks this would have been a simple test to meet. However, since the vehicle would also have been required to meet the 'frontal' and 'lateral' requirements by automatic means if option S4.3.1 were taken, no truck manufacturer chose to comply with the 'rollover' requirements of Standard No. 208 via the Standard No. 216 option. Rather, seat belts were installed on all large trucks.; Sincerely, Frank Berndt, Chief Counsel