Skip to main content
Search Interpretations

Interpretation ID: aiam3765

Ms. Patricia Hill, 2150 Hacker Road, Howell, MI 48843; Ms. Patricia Hill
2150 Hacker Road
Howell
MI 48843;

Dear Ms. Hill: This responds to your March 23, 1983, letter asking five specifi questions relating to Standard No. 302, *Flammability of Interior Materials*. Your questions and their answers are listed below:; 1. Provide a definitive interpretation of 'erratic burning' as used i the subject standard that may be related to a test procedure.; 'Erratic burning,' as that term is used in the standard, relates t incidents where the material may soften or bend at the flaming end in a way that would not allow for uniform burning. Erratic burning, therefore, includes, but is not limited to, nonuniform burning as indicated in S5.1.3 of the standard where the use of support wires is mentioned.; 2. Provide a definitive interpretation of the word 'anticipate' as use in TP 302-02. That is, must the expectation of a softening and bending of the flaming end be based upon an actual test of an identical test specimen? A similar test specimen?; In actual practice, a test specimen is observed while burning during compliance test to FMVSS No. 302. If the specimen is found both to soften and bend at the flaming end during testing and also fails to meet the minimum burn rate requirement, a retest is performed using support wires.; 3. Does the agency still plan to issue an interpretive amendmen limiting or clarifying the use of support wires as stated in your 1976 letter? When?; The agency currently has no plans for any modifications of Standard No 302.; 4. How do the procedural requirements of the subject standard apply t a test specimen that bends at the flaming end prior to ignition by a bunsen burner?; We are not certain of the question that you are asking. The materia would not have a flaming end to bend prior to ignition of the bunsen burner. If by this question you mean to ask what we would do about non-flat test specimens, the agency always attempts to test flat specimens only.; 5. Does the NHTSA plan to revise TP 302-02 to reflect your 197 interpretation and your response to this letter? When?; The agency currently has no plans for any modifications to TP 302- 02. Sincerely, Frank Berndt, Chief Counsel