Interpretation ID: aiam3835
President
Hella North America
Inc.
P.O. Box 499
Flora
IL 62839;
Dear Mr. Genthe: This is in reply to your letter of January 23, 1984, with respect t the inclusion of other lighting functions in a replaceable bulb headlamp compartment. These functions could include parking lamps, turn signal lamps, or side marker lamps. The bulb used would meet Standard No. 108/SAE specifications for the function chosen and they would be incorporated into the compartment by a 'sealed attachment.' You represent that there will be no impairment of any function, and that the overall assembly will meet all photometric and environmental specifications. You have asked whether such a combination assembly is permissible under Standard No. 108.; The agency interprets Standard No. 108's specifications for replaceabl bulb headlamps as allowing only one bulb in a lamp assembly to be used for headlighting purposes. It is silent as to whether additional bulbs may be used to provide other lighting functions. This means that such a bulb is permitted.; Obviously the inclusion of a second bulb can affect the characteristic of the assembly, whether through heat build up, the introduction of contaminants through the junction of the bulb and assembly, etc. These problems would appear to be minimized under the assumptions set forth in your letter. We believe therefore that, under these conditions, an auxiliary bulb could be included in the headlighting compartment, provided that the assembly meets all applicable requirements of Standard No. 108 for each function. Problems that may develop in service would be subject to the safety related defects authority of the National Traffic and Motor Vehicle Safety Act.; If Hella proceeds with a multi-bulb design, we would like to reques that it share with us the types of tests it will be developing which it deems necessary to insure adequate safety performance, so that our knowledge of the art lamp technology may be broadened.; Sincerely, Frank Berndt, Chief Counsel