Interpretation ID: aiam4967
Automotive Equipment Legal & Homologation Sect. Stanley Electric Co. Ltd. 2-9-13
Meguro-ku Tokyo 153
Japan;
"Dear Mr. Watanabe: This responds to your letter of February 6, l992 to the Administrator, requesting an interpretation of section S7.2(b) of Motor Vehicle Safety Standard No. 108. Section S7.2(b) requires that headlamp lenses be marked 'with the name and/or trademark of the manufacturer, which is registered with the U.S. Patent and Trademark Office.' Stanley Electric Co., Ltd. of Japan has subsidiaries in Thailand and Taiwan. Each subsidiary uses three manufacturer identification marks, and you have asked whether each subsidiary may use one of the marks as a manufacturer identification under S7.2(b). You also relate that application has been made to the U.S. Patent and Trademark Office with respect to one of those identification marks. Certainly, once registration has been completed, Stanley of Thailand and Stanley of Taiwan may use the registered mark and this will be in compliance with Standard No. 108. Stanley has not registered the other two identification marks (TH STANLEY or TW STANLEY, and STANLEY TH or STANLEY TW) because it has concluded that these are not trademarks but the manufacturer's name. We agree with your suggestion that the identification marks TH STANLEY, TW STANLEY, STANLEY TH, and STANLEY TW are just the manufacturer's name, not a trademark. Section S7.2(b) of Standard No. 108 does not specify any particular form in which the manufacturer's name must appear on the lens, nor does that section require the manufacturer's name to be registered with the U.S. Patent and Trademark Office. Therefore, there would be no violation of S7.2(b) if your Thai and Taiwanese subsidiaries mark the lenses of their headlamps with the identification marks identified in your correspondence as manufacturer names. Sincerely, Paul Jackson Rice Chief Counsel";