Interpretation ID: aiam5003
#1500 Dallas
Texas 75201;
"Dear Senator Gramm: Thank you for your letter on behalf of you constituent, Mr. Frank Sonzala, Senior Vice President of International Transquip Industries (ITI), regarding Federal Motor Vehicle Safety Standard No. 121, Air Brake Systems. ITI is a manufacturer of air brake systems and is apparently having difficulty selling its product to vehicle manufacturers because of a compliance issue related to Standard No. 121. The National Highway Traffic Safety Administration's Chief Counsel, Paul Jackson Rice, reviewed Mr. Sonzala's concerns, and I am pleased to provide you the following information. By way of background information, NHTSA issues Federal motor vehicle safety standards under the National Traffic and Motor Vehicle Safety Act (Safety Act). The agency does not provide approvals of motor vehicles or motor vehicle equipment. Instead, the Safety Act requires manufacturers to certify that their vehicles or equipment comply with applicable safety standards. Standard No. 121 specifies braking requirements for vehicles equipped with air brake systems. The purpose of the standard is to ensure safe braking performance under normal and emergency conditions. The standard applies only to motor vehicles and not to motor vehicle equipment. Therefore, vehicle manufacturers are responsible for ensuring compliance with the standard, and not brake equipment manufacturers such as ITI. The dispute between ITI and the vehicle manufacturers (ITI uses the term 'original equipment manufacturers') relates to the standard's parking brake requirements. The specific requirement at issue, set forth at S5.6 of Standard No. 121, requires a vehicle's parking brake to meet certain grade holding requirements (or other equivalent requirements) with 'any single leakage-type failure' of certain parts, including service brake chamber diaphragms. The purpose of this requirement is to ensure that a driver can safely park his or her vehicle in the event of a leakage-type failure in the service brake system. Leakage-type failures include such things as ruptured or severed brake hoses and torn diaphragms. Since these types of failures are relatively common in air brake systems, NHTSA believes that it is important that drivers be able to safely secure heavy trucks and other vehicles with such failures, until the vehicles can be repaired. For the purpose of determining whether a vehicle can meet Standard No. 121's grade holding requirements with one particular leakage-type failure, a failed diaphragm, ITI would like the standard to be interpreted to cover only a very limited and specific type of failure, i.e., a hole 1/8 inch in size located in a particular place. ITI states that the vehicle manufacturers generally have a broader view of what constitutes a failed diaphragm, i.e., they believe that failures include holes larger than 1/8 inch. ITI argues that Standard No. 121 is ambiguous in this area and requests NHTSA to issue an interpretation supporting its position. After consulting with NHTSA's Chief Counsel, we can state that the vehicle manufacturers are correct in their understanding that a failed diaphragm is not limited to a diaphragm with a 1/8 inch hole. Therefore, if a vehicle cannot pass Standard No. 121's grade holding test with a larger hole in a failed diaphragm, the vehicle manufacturer cannot certify that the vehicle complies with the standard. Further, we disagree with ITI's contention that Standard No. 121 is ambiguous as to what constitutes a failed diaphragm. As indicated above, Standard No. 121 specifies that the grade holding requirements must be met with any single leakage-type failure of certain parts, including a failed diaphragm. The usage of the term 'any,' when used in connection with a set of items, is specifically defined at 49 CFR 571.4 as meaning the totality of that set of items, any one of which may be selected by the Administration for testing. Thus, a vehicle must meet the grade holding requirements regardless of the extent of the failure selected by NHTSA for testing. We note that leakage-type failures of many types and sizes can occur in vehicle brake systems. NHTSA intentionally did not limit the size or location of such failures in developing this requirement to ensure that a vehicle has adequate grade holding performance regardless of the specific nature of such a failure. ITI also asked whether other broken components, such as heavy parking springs, brake shoes, linings, and drums should be part of Standard No. 121's test requirements, since diaphragms are tested when torn. Although NHTSA's brake standards do not have any express test requirements for broken parking springs, brake shoes, linings or drums, those standards include a number of requirements to ensure adequate braking performance in the event of various failures in a vehicle's brake system. We hope that this information is helpful. Sincerely, Frederick H. Grubbe Enclosure: Constituents Correspondence cc: Washington Office";