Interpretation ID: aiam5062
MD 20866;
"Dear Mr. Beck: This responds to your letter requesting informatio about how this agency's regulations would apply to the product you are developing. While you initially requested that the agency keep your inquiry confidential, you removed this request for confidentiality in a September 18, 1992 letter to Marvin Shaw of my staff. You described your product as a reflective decal that would be placed on the backside of a motor vehicle's rear view mirror and on its rear bumper. I am pleased to have this opportunity to explain our requirements to you. I am also enclosing a copy of a fact sheet entitled 'Information for New Manufacturers of Motor Vehicles and Motor Vehicle Equipment.' By way of background information, NHTSA is authorized to issue Federal Motor Vehicle Safety Standards that set performance requirements for new motor vehicles and items of motor vehicle equipment. Section 102(4) of the Safety Act defines, in relevant part, the term 'motor vehicle equipment' as: any system, part, or component of a motor vehicle as originally manufactured or any similar part or component manufactured or sold for replacement or improvement of such system, part, or component or as any accessory, or addition to the motor vehicle ... In determining whether an item of equipment is considered an accessory, NHTSA applies two criteria. The first criterion is whether a substantial portion of the expected use of the item is related to the operation or maintenance of motor vehicles. We determine the expected use by considering product advertising, product labeling, and the type of store that retails the product, as well as available information about the actual use of the product. The second criterion is whether the product is intended to be used principally by ordinary users of motor vehicles. If the product satisfies both criteria, then the product is considered to be an 'accessory' and thus is subject to the provisions of the Safety Act. Applying these criteria to your reflective decals, it appears that your product would be an accessory and thus an item of motor vehicle equipment under the Safety Act. Based on our understanding of your letter, it appears that a substantial portion of your device's expected use will be during the operation of a motor vehicle. In addition, it appears that your product would typically be used by ordinary users of motor vehicles. While your device would be considered an item of motor vehicle equipment, this agency has not issued any standards setting forth performance requirements for such a device. Nevertheless, any person that installed this device on a new vehicle before the vehicle's first sale to the public would be required to certify that the vehicle complies with all applicable safety standards, including Standard No. 111, Rearview Mirrors, with this device installed. After the first sale of the vehicle to the public, certain persons who modify vehicles are subject to the prohibition in section 108(a)(2) of the Safety Act (15 U.S.C. 1397(a)(2)). That section provides that: 'No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or in part, any device or element of design installed on or in a motor vehicle or item of motor vehicle equipment in compliance with an applicable Federal motor vehicle safety standard...' To avoid a 'rendering inoperative' violation for vehicles that comply with any of our safety standards, commercial after market installers of your device should examine any installation instructions that you may have for your device and compare those instructions with the requirements of our safety standards, to determine if installing the device in accordance with those instructions would result in the vehicle no longer complying with any of those safety standards. If the installation of your device would not result in a 'rendering inoperative' of the vehicle's compliance with the safety standards, the device can be installed by manufacturers, distributors, dealers and repair shops without violating any Federal requirements. The prohibitions of Section 108(a)(2)(A) do not apply to the actions of a vehicle owner in modifying his or her vehicle. Thus, a vehicle owner would not violate the Safety Act by installing your device even if doing so would adversely affect some safety feature in his or her vehicle. You should be aware that, as a manufacturer of an aftermarket item of motor vehicle equipment, you are subject to the requirements in sections 151-159 of the Safety Act concerning the recall and remedy of products with defects related to motor vehicle safety. In the event that you or NHTSA determines that your product contains a safety related defect, you would be responsible for notifying purchasers of the defective equipment and for remedying the problem free of charge. I hope this information is helpful. If you have any further questions about NHTSA's safety standards, please feel free to contact Marvin Shaw of my staff at this address or by telephone at (202) 366-2992. Sincerely, Paul Jackson Rice Chief Counsel Enclosure";