Interpretation ID: aiam5201
TX 76528-9399;
Dear Ms. Erwin: This responds to your May 15, 1993, letter to forme Secretary Card. Because your letter concerns motor vehicle safety, it has been referred to the National Highway Traffic Safety Administration (NHTSA) for response. You are concerned with vehicles used by the State of Texas to transport prisoners because these vehicles have metal seats and no occupant restraints for the prisoners and asked who you should contact to voice your complaint. The National Traffic and Motor Vehicle Safety Act authorizes NHTSA to issue motor vehicle safety standards that apply to the manufacture and sale of new motor vehicles and new items of motor vehicle equipment. NHTSA has exercised this authority to establish a standard which requires seat belts to be installed at all designated seating positions in many, but not all, vehicles. In addition, different belt installation requirements apply depending on the vehicle type, seating position within the vehicle, and the GVWR of the vehicle. Accordingly, I cannot identify the specific belt installation requirements for the vehicle in which you were transported without knowing the date of the vehicle's manufacture, the vehicle's seating capacity, and gross vehicle weight rating (GVWR) of the vehicle. In addition, your concerns about the State of Texas' use of the vehicle are not addressed by Federal law, which addresses only the manufacture and sale of motor vehicles, not their subsequent use. Because your questions concern the safety of the State of Texas' vehicles used to transport prisoners, you may wish to contact the Governor's Office, the head of the Texas prison system, or your state representative. I hope you find this information helpful. Sincerely, John Womack Acting Chief Counsel;