Interpretation ID: nht79-2.21

DATE: 08/31/79

FROM: AUTHOR UNAVAILABLE; F. Berndt; NHTSA

TO: Halliburton Services

TITLE: FMVSS INTERPRETATION

TEXT:

Mr. Ron Bechtel Halliburton Services Drawer 1431 Duncan, Oklahoma 73533

Dear Mr. Bechtel:

This is in response to your letter of May 1, 1979, requesting an interpretation of the definition of "incomplete vehicle" contained in Federal Motor Vehicle Safety Standard No. 115, and in confirmation of your subsequent telephone conversations with Mr. Schwartz of my office.

The term "incomplete vehicle" is defined in S3 of the standard to mean "an assemblage consisting, as a minimum, of frame and chassis structure, power train, steering system, suspension system, and braking system, to the extent that those systems are to be part of the completed vehicle, that requires further manufacturing operations, other than the addition of readily attachable components, such as mirrors or tire and rim assemblies, or minor finishing operations such as painting, to become a completed trailer."

You are correct in saying that most of the components listed in the definition are not meant to be part of a trailer. Consequently, an incomplete trailer would consist of only those components, such as a frame, listed in the definition which are meant to be part of the completed trailer. The outfitting of an incomplete trailer for a specific purpose would not be sufficient to make Halliburton Services responsible for assigning the vehicle identification number.

Sincerely,

Frank Berndt Chief Counsel

(405) 251-3565 May 1, 1979 RB-90-79

Office of Chief Council National Highway Traffic Safety Administration 400 7th Street, S.W. Washington, D.C. 20590

Dear Sir:

VIN Standards

I would like to request an interpretation as to the definition of an "incomplete vehicle" in regard to trailers. The definition as contained in S571.115(s)(3) is only applicable to powered vehicles as the stated minimum requirements are not relative to trailers.

Very truly yours,

Ron Bechtel

RB:im