Interpretation ID: nht81-1.32

DATE: 03/10/81

FROM: STEPHEN W. MATSON -- TRADE SERVICES INC

TO: CHIEF COUNSEL NHTSA

TITLE: NONE

ATTACHMT: ATTACHED TO LETTER DATED 03/25/81 FROM FRANK BERNDT -- NHTSA TO STEPHEN W. MATSON; REDBOOK A22, STANDARD 108

TEXT: Dear Sir:

This letter is to formally request your review and interpretation of Federal Motor Vehicle Safety Standard 108 as it relates to the placement of a clear lens cover in front of a motorcycle headlamp. The attached drawings demonstrate the specific concept in question.

Information contained in SAE standards referenced in Table III of FMVSS 108 indicates that a specific prohibition exists regarding a headlamp lens cover for passenger cars, multipurpose vehicles, trucks and busses. The SAE Motorcycle Headlamp Standard (SAE J584) contains no such prohibition. It is our understanding that a component configuration such as the one illustrated would not conflict with SAE referenced requirements.

Another section of FMVSS 108 which could relate to this issue is Paragraph S4.1.3 which states that "No . . . . automotive equipment shall be installed that impairs the effectiveness of lighting equipment required by this standard." If, when the secondary lens in question is in place, the photometric requirements of FMVSS 108 can be met or exceeded, the lens cover would then be compatible with the standard.

Detailed review of FMVSS 108 and the other Federal Motor Vehicle Safety Standards have revealed no other requirements germane to this issue.

Your review of our analysis will be most appreciated. We feel that the proposed concept is in keeping with the spirit as well as the letter of the law. Hopefully your review will confirm our opinion. Should you have any questions on this matter please do not hesitate to contact me.

Sincerely,

ENC