Interpretation ID: nht93-3.34

DATE: May 5, 1993

FROM: John Womack -- Acting Chief Counsel, U.S. Department of Transportation, NHTSA

TO: Bob Dittert -- Trooper, Texas Department of Public Safety

TITLE: None

ATTACHMT: Attached to letter dated 1-14-93 from Bob Dittert to NHTSA (OCC 8240)

TEXT: This responds to your inquiry about how the Federal Motor Vehicle Safety Standards affect State laws applicable to the same aspect of performance. You were particularly interested in our requirements for window tinting. I am pleased to have this opportunity to explain our regulations to you. After providing background information, I will answer the specific questions raised in your letter.

The National Traffic and Motor Vehicle Safety Act authorizes the National Highway Traffic Safety Administration (NHTSA) to issue Federal motor vehicle safety standards that establish specific levels of safety performance for new motor vehicles and new items of motor vehicle equipment. Standard 205, "Glazing Materials," issued under the Safety Act, has requirements that limit the amount of tinting that can be placed on windows in new vehicles. The standard currently imposes a minimum level of light transmittance of 70% in all areas requisite for driving visibility (which includes all windows on passenger cars). The primary purpose of this requirement is to ensure adequate visibility through the windows, thereby reducing the risk of a motor vehicle crash.

Under S108(a)(1)(A) of the Safety Act, no person shall manufacture or sell a new motor vehicle or new item of motor vehicle equipment that does not meet all applicable FMVSS's. NHTSA tests vehicles and equipment sold to consumers for compliance with the FMVSS's and investigates defects relating to motor vehicle safety. If a manufacturer or NHTSA determines that a noncompliance or safety-related defect exists, the manufacturer must notify purchasers of its product and remedy the problem free of charge. A manufacturer of a noncomplying product is also subject to a civil penalty of up to $1,000 for each noncomplying item it produces.

The prohibition in S108(a)(1)(A) against selling complying vehicles and items of equipment does not apply to a vehicle or item of equipment after its first sale to a consumer. However, S108(a)(2)(A) of the Act applies to modifications made to new and used vehicles by motor vehicle manufacturers, distributors, dealers and repair businesses. That section provides that:

No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or in part, any device or element of design installed on or in a motor vehicle ... in compliance with an applicable Federal motor vehicle safety standard.

Please note that the "render inoperative" provision of section 108(a)(2)(A) does not apply to actions by individual vehicle owners.

I would now like to apply this background to the particular questions raised in

your letter.

QUESTION ONE:

"Are the CFRs law and enforceable only by federal agents?"

NHTSA's regulations and safety standards are set forth in Title 49 of the Code of Federal Regulations (CFR). These regulations and standards apply without State ratification to the manufacture and sale of new motor vehicles and new items of motor vehicle equipment. NHTSA enforces these regulations and safety standards.

QUESTION TWO:

"Are the Federal Motor Vehicle Safety Standards law and only enforceable on new manufactured vehicles?"

The FMVSS's apply to new motor vehicles and new items of motor vehicle equipment, and not to used vehicles or equipment. NHTSA may bring enforcement actions against manufacturers of new vehicles and new items of equipment that do not comply with applicable FMVSS's. NHTSA also enforces the "render inoperative" provision of the Safety Act against commercial entities that modify new or used vehicles in a manner that violates the "render inoperative" provision. We also note that NHTSA can investigate safety defects in new or used vehicles or items of equipment.

QUESTION THREE:

"Are states allowed to enact legislation that allows less stringent standards than the CFRs?"

We understand you to ask this in the context of window tinting requirements, since elsewhere in your letter you ask whether a Texas law that allows light transmittance of 35 percent violates Federal law.

Your question relates to S103(d) of the Safety Act, which states:

Whenever a Federal motor vehicle safety standard ...

is in effect, no State or political subdivision of a State shall have any authority either to establish, or to continue in effect, with respect to any motor vehicle or item of motor vehicle equipment any safety standard applicable to the same aspect of performance of such vehicle or item of equipment which is not identical to the Federal standard.

Whether State law is preempted under S103(d) depends in part on the conduct that is regulated by that law. Federal safety standards regulate the manufacture and sale of new motor vehicles and new items of motor vehicle equipment. State law would be preempted to the extent it established performance requirements applicable to the MANUFACTURE of vehicles or glazing that differ from those in Standard 205. State law would also be preempted if it purported to ALLOW THE MANUFACTURE OR SALE of glazing materials or new vehicles containing glazing material that did not meet the specifications of

Standard 205.

As stated above, Federal law also regulates modifications made to new and used vehicles by motor vehicle manufacturers, distributors, dealers and repair businesses (SlO8(a)(2)(A) of the Safety Act). The effect of S108(a)(2)(A) is to impose limits on the tinting practices of businesses listed in S108(a)(2)(A). These businesses may not install tinting on new or used vehicles that reduces the light transmittance of windows covered by Standard 205 to a level below the Federal requirement of 70 percent. A state law would be preempted if it purported to ALLOW MODIFICATIONS VIOLATING STANDARD 205 by these named businesses. Section 108(a)(2)(A) does not apply to actions by individual vehicle owners.

Because Federal safety standards regulate the manufacture and sale of new motor vehicles, state requirements applicable to the registration and inspection of motor vehicles after the first sale to a consumer are not preempted merely because they are not identical to the Federal safety standards, as long as they do not interfere with the achievement of the purposes of Federal law. Therefore, a state could permit the registration of a vehicle which had been altered by its owner by the addition of window tinting, even when the tinting reduces the light transmittance below the Federal standard. However, the state cannot legitimize conduct - the rendering inoperative of glazing by commercial businesses installing window tinting that is illegal under Federal law.

QUESTION 4:

"Concerning the installation of non-complying automotive equipment, i.e., sun screening, taillamp 'black out' lenses, neon license plate lamps, etc., is this allowed by the owner but prohibited installation by a commercial entity?"

You are correct that S108(a)(2)(A) of the Safety Act regulates the modifications of only the commercial entities listed in that section of the Act, and that the Safety Act does not prohibit an individual from modifying his or her vehicle such that it no longer complies with the FMVSS's. The States may have requirements governing the modification of a vehicle by individual owners.

I hope you find this information helpful. If you have any other questions, please contact Mr. Marvin Shaw of my staff at (202) 366-2992.