Search Interpretations
Interpretation ID: nht94-3.23
TYPE: INTERPRETATION-NHTSA
DATE: June 6, 1994
FROM: Hellfried Sandig, Reitter & Schefenacker GMBH & Co. KG
TO: Richard van Iderstine
TITLE: NONE
ATTACHMT: Attached to letter dated 7/8/94 from John Womack to Hellfried Sandig (A42; STD 108)
TEXT: I have your Fax-Nr. from Mr. Althoff/Holla. We are manufacturer from lighting equipments too and we have a rear combination lamp with one stop lamp and two tail lamps.
My question:
is if necessary, that we must have the ratio 5:1/3:1 between the stop and the tail lamp measurements in this arrangement?
In the past, we had only a combination stop/tail with a 32/3 CP filament lamp. And with ECE Reglement No. 7 we don't have this problem.