Skip to main content
Search Interpretations

Interpretation ID: nht94-6.5

DATE: May 3, 1994

FROM: John Womack -- Acting Chief Counsel, NHTSA

TO: Peter Drymalski -- Investigator, Montgomery County Government, Office of Consumer Affairs

TITLE: None

ATTACHMT: Attached to letter dated 3/1/93 from Peter Drymalski to John Womack (OCC-8371)

TEXT:

This responds to your letter and telephone conversations with David Elias, formerly of this office, asking about a situation you term as the "cannibalization" of new, unsold vehicles. I apologize for the delay in our response.

The situation involves motor vehicle dealers who remove equipment (e.g., a power steering pump) from new vehicles to repair or replace malfunctioning equipment on previously-sold vehicles. The new vehicles are "cannibalized" to expedite repairs when replacement equipment for the repair is temporarily unavailable. The new vehicles have their cannibalized equipment replaced when the parts become available, before the vehicles are sold.

You ask whether the National Highway Traffic Safety Administration (NHTSA) permits dealers to cannibalize parts. As explained below, the answer is yes, provided that certain requirements are met.

By way of background, the National Traffic and Motor Vehicle Safety Act ("Safety Act") authorizes NHTSA to issue Federal motor vehicle safety standards ("FMVSS's) applicable to new motor vehicles and items of motor vehicle equipment. Section 108(a)(1)(A) of the Safety Act prohibits any person from manufacturing or selling a new vehicle manufactured on or after the effective date of any applicable FMVSS that does not comply with each of those standards. Under S114 of the Safety Act, each motor vehicle must be certified as conforming to the FMVSS's. NHTSA's certification regulations (49 CFR Part 567) require any person altering (i.e., performing extensive manufacturing operations on) a certified vehicle before the first purchase of the vehicle by the consumer to certify that the vehicle, as altered, conforms to all applicable standards affected by the alteration. 49 CFR S567.7. However, persons altering a certified vehicle only by the addition, substitution, or removal of "readily attachable components" (e.g., mirrors or tires and rim assemblies) or by performing minor finishing operations (e.g., painting), are not considered alterers, and need not re- certify the vehicle.

Whether modifications involve "readily attachable" components depends on the intricacy of the installation of those components. "Simple tools, a relatively short installation time, and the ability to install the device without extensively modifying the vehicle would all be factors pointing to a decision that a component is readily attachable." NHTSA letter to Fred Cords, March 4, 1975. Applying these considerations to the situation you present, we conclude that a power steering pump is a readily attachable component.

A power steering pump can be installed with extraordinary ease. The pump can be replaced on the dealer's lot in minutes, simply by opening the hood and popping the old pump out and inserting the new one, with no need to use special tools or have special expertise. The pump can be replaced without extensively modifying the vehicle in any manner.

Since the power steering pump is a readily attachable component, the dealer described in your letter is not an alterer under S567.7. The dealer can "cannibalize" the new unsold cars for power steering pumps and install new pumps when they arrive without applying its own new certification label.

I emphasize that a dealer would not be considered an alterer only in the narrow circumstances in which the component being "cannibalized" is readily attachable. If the component is not readily attachable, the dealer could "cannibalize" the new cars and later repair and sell them if the following requirements are met. First, the dealer would be responsible under S108(a)(1)(A) of the Safety Act for ensuring that each new vehicle it sells complies with the applicable FMVSS's. Thus, the new vehicle must comply with the FMVSS's. Second, the dealer would be responsible, as an "alterer," for certifying the new vehicles from which it removed and replaced the equipment. The dealer would be an alterer since the work performed would be more extensive than "the addition, substitution, or removal of readily attachable components" or the "minor finishing operations" described in S567.7. The dealer would certify the vehicle by allowing the original certification label of the type and form specified in S567.7.

In all cases, including where the dealer is replacing a readily attachable component, the dealer must also adhere to S108(a)(2)(A) of the Safety Act, which provides that:

No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or part, any device or element of design installed on or in a motor vehicle or item of motor vehicle equipment in compliance with an applicable Federal motor vehicle safety standard, unless such manufacturer, distributor, dealer, or repair business reasonably believes that such vehicle or item of equipment will not be used... during the time such device or element of design is rendered inoperative.

The effect of S108(a)(2)(A) is to limit the modifications that a dealer may make to a new or used vehicle. If, in making the temporary repair affecting a new vehicle, the dealer "renders inoperative" a device or design installed on the new vehicle pursuant to an FMVSS, the dealer must return the vehicle to compliance before the new vehicle can be sold to the public, or even test-driven by a member of the public.

Section 108(a)(2)(A) also applies to the used vehicles into which the cannibalized equipment is installed. The dealer must ensure that it does not violate the Safety Act by "rendering inoperative" equipment or designs on the vehicles in the process of repairing them.

I hope this information has been helpful. If you have any further questions, please contact Deirdre Fujita of my staff at this address or

by phone at (202) 366-2992.