Interpretation ID: nht95-1.46

TYPE: INTERPRETATION-NHTSA

DATE: February 2, 1995

FROM: Jeffrey D. Shetler -- Manager of Government Relations, Kawasaki Motors Corp., U.S.A.

TO: Office of Chief Counsel -- NHTSA

TITLE: Subject: Motorcycle Turn Signal Pilot Indicator Interpretation of FMVSS 108

ATTACHMT: ATTACHED TO 5/3/95 LETTER FROM JOHN WOMACK TO JEFFREY D. SHETLER (A43; Std. 108)

TEXT: Dear Sir/Madam:

Kawasaki Motors Corp., U.S.A. is hereby requesting an interpretation from NHTSA regarding the applicability to motorcycles of the Turn Signal Pilot Indicator Lamp requirements within Section 5.4.3.3 of SAE J588 NOV84.

When reviewing Table III of FMVSS 108 (Required Motor Vehicle Lighting Equipment) and its applicability to motorcycle turn signal lamps, we are referred to SAE J588, November 1984. SAE J588 not only specifies turn signal lamp requirements but also speci fies other related requirements such as the need for a turn signal pilot indicator lamp, if the turn signal lamps are not readily visible to the driver.

Section 5.4.3.3 of SAE J588 NOV84 indicates the illuminated turn signal pilot indicator lamp, if located on the outside of the vehicle, should emit a yellow colored light.

All Kawasaki motorcycles designed for use on public roads and sold in the United States are equipped with turn signal lamps meeting the requirements of FMVSS 108. In addition, all Kawasaki motorcycles having turn signal lamps are equipped with an illumi nated pilot indicator lamp (yellow colored).

Table III within FMVSS 123; Motorcycle Controls and Displays, specifies requirements for turn signal lamp identification. However, FMVSS 123 does not specify color requirements for the turn signal pilot indicator lamp.

In future model years, Kawasaki would like to change the current yellow colored light that illuminates our motorcycle turn signal pilot indicator lamps to a green colored light. However, when reviewing SAE J588 NOV84 and FMVSS 123, we cannot determine w ith confidence if it would be allowed.

When reviewing the language within Section 5.4.3.3 of SAE J588 NOV84, it seems evident this section was written with passenger cars in mind and not motorcycles. "5.4.3.3 - If the illuminated indicators are located on the outside of the vehicle, for exam ple on the front fenders, they should emit a yellow colored light and have a minimum projected illuminated area of 60 mm." It is our belief the color and area requirements are specified within this section to insure visibility by the driver because the l ocation of the indicator lamp would be a greater distance away from the drivers eye than a indicator lamp located inside the vehicle on the dash panel.

FMVSS 123 does not need to address distance from the drivers eye, color, or size of the turn signal pilot indicator lamp because the location of the indicator lamp will always be within a reasonable distance from the drivers eye.

Motorcycle turn signal pilot indicator lamps are, in most cases, located within the main instrument panel of the motorcycle with other instrumentation such as speedometer, tachometer, oil pressure gage or warning light, fuel level gage, and transmission neutral indicator. The main instrument panel on motorcycles is usually located between the handlebars and the headlamp. In some cases, motorcycle turn signal pilot indicator lamps are located away from the main instrument panel on the fuel tank, or wit hin a separate panel between the motorcycles fuel tank and handlebars. When considering these locations and their distance from the drivers eye, we believe any pilot lamp light color would be acceptable.

When reviewing current FMVSS requirements (FMVSS 108 / FMVSS 123), we believe we are not limited to using only a yellow color for the lamp of our turn signal pilot indicators because FMVSS 123 does not specify color requirements for turn signal indicator lamps. However, as indicated above, we are not entirely confident our interpretation of the requirements is correct because of the yellow color requirement specified within Section 5.4.3.3 of SAE J588 NOV84. Therefore, we are requesting your assistance in resolving this matter.

Thank you in advance for your timely response to our request.

If further information is required, I can be reached at (714) 770-0400 ext 2456.