Interpretation ID: aiam5356
Unit 206 Palm Springs
CA 92264;
"Dear Mr. Ozols: This responds to your February 8, 1994, letter askin about how this agency's regulations might apply to your product, the Serv-o-tray. I am pleased to have this opportunity to explain our regulations. It appears from the enclosed technical description and photograph that the Serve-o-tray is a folding adjustable table designed to mount between the driver and passenger seats of a vehicle, and hold food, drinks, etc. As depicted, the Serv-o-tray is secured to the center console with an adhesive pad. The table is mounted on a swiveling, articulated, lockable arm that is composed of two horizontal and two vertical tubular support members. The Serv-o-tray is made of injection molded plastic and is capable of supporting up to 20 pounds, including a laptop computer. You explain that your product is intended to be used while the vehicle is stationary or moving. By way of background information, the National Highway Traffic Safety Administration (NHTSA) is authorized to issue Federal motor vehicle safety standards (FMVSS's) for new motor vehicles and new items of motor vehicle equipment. Section 102(4) of the National Traffic and Motor Vehicle Safety Act (the 'Safety Act') defines, in relevant part, the term 'motor vehicle equipment' as: any system, part, or component of a motor vehicle as originally manufactured or any similar part or component manufactured or sold for replacement or improvement of such system, part, or component or as any accessory, or addition to the motor vehicle ... (emphasis added). In determining whether an item of equipment is considered an accessory, NHTSA applies two criteria. The first criterion is whether a substantial portion of the expected use of the item is related to the operation or maintenance of motor vehicles. We determine a product's expected use by considering product advertising, product labeling, and the type of store that retails the product, as well as available information about the actual use of the product. The second criterion is whether the product is intended to be used principally by ordinary users of motor vehicles. If the product satisfies both criteria, then the product is considered to be an 'accessory' and thus is subject to the provisions of the Safety Act. Applying these criteria to the Serv-o-tray, it appears that this product would be an accessory and thus an item of motor vehicle equipment. Based on our understanding of the product, it appears that a substantial portion of the expected use of the Serv-o-tray relates to motor vehicle operation, by allowing the occupants to eat while operating the car. Also, it appears that the product would typically be used by ordinary users of motor vehicles. While the Serv-o-tray is an item of motor vehicle equipment, NHTSA has not issued any standards for such a device. Nevertheless, there are other Federal laws that indirectly affect the manufacture and sale of your product. You as the product's manufacturer are subject to the requirements in sections 151-159 of the Safety Act concerning the recall and remedy of products with defects related to motor vehicle safety. In the event that you or NHTSA determines that the product contains a safety related defect, you would be responsible for notifying purchasers of the defective equipment and remedying the problem free of charge. This agency is very concerned about the safety implications of the Serv-o-tray, especially if it is swiveled in front of the occupants in an air bag-equipped vehicle. Under the provisions of FMVSS No. 208, 'Occupant Crash Protection,' all new cars and trucks must be equipped with a driver side and passenger side air bag by September 1, 1998. Manufacturers are already producing ever increasing numbers of air bag-equipped cars and trucks. The enclosed document entitled 'Sudden Impact' describes the speed with which an air bag deploys. Should the Serv-o-tray be installed in an air bag-equipped vehicle, the occupants could be at risk of injury or death from the interaction of the deploying air bag and the Serv-o-tray or its contents. To protect the occupant, this agency will require that every new vehicle with an air bag be provided with a caution label that states, among other things, 'TO AVOID SERIOUS INJURY . . . Do not place any objects over the air bag or between the air bag and yourself.' As you can see, the installation of a Serv-o-tray could be contrary to this warning. There are other potential safety problems associated with the Serv-o-tray. Even without being propelled by an air bag, the Serv-o-tray or its contents could impact the occupant's head, abdomen or lower extremities during a collision. It also seems possible that the Serv-o-tray could interfere with the driver's use of the vehicle's transmission shift lever in an emergency situation. We ask that you consider these and all possible safety impacts of the Serv-o-tray. If the Serv-o-tray were installed by a vehicle manufacturer as original equipment, the vehicle manufacturer would have to certify that the vehicle, with the Serv-o-tray installed, complies with all FMVSS's. Among the FMVSS's that might be affected by the Serv-o-tray installation are Standard No. 201, 'Occupant Protection in Interior Impact' (copy enclosed), and Standard No. 208. A commercial business that installs the Serv-o-tray would also be subject to provisions of the Safety Act that affect modifications of new or used vehicles. Section 108(a)(2)(A) of the Safety Act (15 U.S.C. 1397(a)(2)(A)) provides that: No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or in part, any device or element of design installed on or in a motor vehicle ... in compliance with an applicable Federal motor vehicle safety standard. This means that a manufacturer, distributor, dealer, or motor vehicle repair business must not install your product if the Serv-o-tray renders inoperative the vehicle's compliance with the FMVSS's. For instance, installing the Serv- o-tray in front of the driver or passenger could degrade the performance of an air bag or the seat belts in the vehicle. Any violation of this 'render inoperative' prohibition would subject the violator to a potential civil penalty of up to $1,000 for each violation. Please note also that the render inoperative prohibition does not apply to modifications that vehicle owners make to their own vehicles. Thus, Federal law would not apply in situations where individual vehicle owners install the Serv-o-tray in their own vehicles, even if the installation were to result in the vehicle no longer complying with the safety standards. However, NHTSA encourages vehicle owners not to degrade any safety device or system installed in their vehicles. In addition, individual States have the authority to regulate modifications that individual vehicle owners may make to their vehicles, so you might wish to consult State regulations to see whether your product would be permitted. I hope this information is helpful. I have enclosed a fact sheet entitled 'Information for New Manufacturers of Motor Vehicles and Motor Vehicle Equipment.' If you have any further questions about NHTSA's safety standards, please feel free to contact us at this address or by telephone at (202) 366-2992. Sincerely John Womack Acting Chief Counsel Enclosure";