Interpretation ID: aiam0775
General Manager
Weirich Associates
540 Frontage Road
Northfield
IL 60093;
Dear Mr. Weirich: Thank you for your letter of July 11, 1972, inquiring about the use o plastic for an automatically closing fuel cap for automobiles.; The National Highway Traffic Safety Administration (NHTSA) has th responsibility for promulgating standards that improve the safety performance of new motor vehicles to minimize injuries and fatalities associated with the use of motor vehicles. Among the standards that have been issued is Federal Motor Vehicle Safety Standard (FMVSS) No. 301, which specifies performance requirements for the fuel tank, fuel tank filler pipe, and fuel tank connections. Like other Federal standards issued by the NHTSA, this standard is performance oriented and does not specify design requirements. This standard will shortly be amended to specify additional performance requirements including rear-end collisions and rollover. In addition, other proposals will also be issued to considerably improve fuel containment to minimize the possibility of fuel spillage resulting from additional vehicle impacts. The essential requirements pertain to demonstrations of safe fuel containment as the result of standardized vehicle crash tests. how the results are to be achieved, what materials can or cannot be used, or other design features, are left to the discretion of the motor vehicle manufacturer in order that there should be the maximum freedom for innovation and inventiveness to meet the specified safety performance. We have no restrictions in the use of plastics or other materials that meet a specified safety performance requirement.; In view of present rulemaking action to amend FMVSS No. 301, there ha been much information assembled, which is part of the public record, concerning comments from manufacturers, the interested public, and from suppliers of components. Your components, including a self-closing fuel cap and a seal within the filler pipe are interesting developments having possible contribution to improved safety. We would be pleased to have more information concerning these developments and with your permission, we would like to have copies of descriptive information to put into our public record, Docket No. 70-20, for the public and for the motor vehicle industry to see.; We should mention also that the Bureau of Motor Carrier Safety, whic regulates interstate commercial transportation of passengers and cargo, has regulations which include fuel caps. you may want to contact this organization for their current requirements. Their location is at the same address of NHTSA.; Relative to pollution, the current requirements for fuel evaporativ emission controls have resulted in motor vehicles being equipped with fuel caps that either have no vents or which vent only after certain stress develops from positive of negative internal tank pressure. You may want to contact the Environmental Protection Agency concerning their regulations. The address is 1626 K Street, N.W., Washington, D.C.; We are enclosing a copy of FMVSS No. 301, a copy of a notice proposin additional requirements, and a copy of Public Law 89-563.; We appreciate your interest in motor vehicle safety. Sincerely, Robert L. Carter, Associate Administrator, Motor Vehicl Programs;