Interpretation ID: 17325.ztv

Mr. F.G.M. Bol
Car Innovations
P.O. Box 143
2665 ZJ Bleiswijk (Holland)
Netherlands

Dear Mr. Bol:

This is in reply to your January 1998 letter to the Department informing us of your V.E.B. System, and stating that "it remains to you the decision to commercialize this product in co-operation with us."

You are interested in marketing this system "with an auto-manufacturer." Therefore, you intend the V.E.B. system to be installed as original equipment on motor vehicles manufactured for sale in the United States. The system may be best described as a center highmounted stop lamp that displays a vehicle's registration number under ordinary circumstances and the word "stolen" when the vehicle is being operated without the owner's authority.

The center highmounted stop lamp must comply with all requirements of United States Federal Motor Vehicle Safety Standard No. 108. One of these requirements is that the lamp comply with the requirements of Figure 10. This Figure prescribes minimum and maximum candela to be measured at 18 individual test points. If any one of these test points is obscured by the vehicle's registration number or the word "stolen," then it is not legal to install the lamp on a motor vehicle. We believe that it might be difficult to design a lamp that both displays the information you anticipate and meets Standard No. 108. I enclose a copy of Figure 10 so that you may determine whether any of the 18 test points may be obscured by the V.E.B. system. A second requirement is that the lens area must be at least 4.5 square inches. Any obstruction would affect this, too.

Standard No. 108 also prohibits the installation of any device that impairs the effectiveness of required lighting equipment such as the center stoplamp. Even if the candela and lens area requirements are met, the clarity and meaning of the stop signal may be undermined by letters or numbers appearing when the lamp is lit that have no relation to the stop lamp function.

The Department has no authority to engage in commercial promotions with manufacturers, and we cannot help you with this product.

Finally, we would like to call your attention to a typographical error on the cover and interior of your sales folder. The verb indicating theft in English is "to steal," not "to steel."

Sincerely,
John Womack
Acting Chief Counsel
Enclosure
ref:108
d:5/6/98