Interpretation ID: 21015.ogm

Mr. Murray West
P.O. Box 7081
Terre Haute, IN 47802

Dear Mr. West:

This responds to your letter requesting information about modifying the seat back in your new Ford Escort. I apologize for the delay in our response. You indicate that the angle of the seatback is uncomfortable for you and that you wish to have the seat modified so that the seat back would be perpendicular to the seat cushion. Representatives of the dealer who sold the car to you have indicated that it would be illegal for them to modify the seat in the manner you request. You ask that you be provided with the statutes or regulations which make modifying the existing seat illegal.

We would like to explain that the National Highway Traffic Safety Administration (NHTSA) is authorized to issue Federal motor vehicle safety standards (FMVSS) that set performance requirements for new motor vehicles and items of motor vehicle equipment. Manufacturers are required to assure that their products conform to our safety standards before they can be offered for sale. After the first sale of the vehicle, manufacturers, distributors, dealers, and repair businesses are prohibited from "knowingly making inoperative" any device or element of design installed on or in a motor vehicle in compliance with an applicable standard. In general, the "make inoperative" prohibition (49 U.S.C. 30122) requires businesses which modify motor vehicles to ensure that they do not remove, disconnect, or degrade the performance of safety equipment installed in compliance with an applicable standard. Violations of this prohibition are punishable by civil penalties of up to $1,100 per violation.

FMVSS No. 207, Seating systems (49 CFR 571.207; copy enclosed), sets forth minimum performance requirements for the seating systems installed in new passenger cars, such as your Ford Escort. FMVSS No. 207 does not contain any requirements that specify that the seat back must be within a certain range of angles to the seat back. The standard does, however, require that seats and seat backs meet certain strength requirements. Any modifications to the seat that would alter its original design could affect the seat's ability to meet these strength requirements. FMVSS No. 208, Occupant crash protection, sets forth certain performance requirements for frontal crash protection. Modifying the seat back angle in the manner you describe in your letter may have an impact on the ability of the seat belt and air bag to protect the driver in a crash. We do not know if modifying the adjustment mechanism on your seat to make the back perpendicular to the seat cushion would affect the seat's compliance with FMVSS No. 207 or No. 208 and how such a modified seat would perform in a crash.

You may wish to ask the manufacturer of your vehicle what effect modifying the seat back angle would have on its ability to meet FMVSS No. 207 or No. 208 as well as the seat's performance in a crash. If the seat back angle can be changed in the way that you describe without affecting the safety performance of the vehicle and its compliance with applicable Federal motor vehicle safety standards, the dealer would not be violating the "make inoperative" provisions described above by modifying the seat.

If you have other questions or require additional information, please contact Otto Matheke of my staff at this address or by phone at (202) 366-2992.

Sincerely,
Frank Seales, Jr.
Chief Counsel
ref:VSA
d.7/12/00