Skip to main content
Search Interpretations

Interpretation ID: 2790y

Mr. Danny Pugh
Engineering Manager
Utilimaster Corporation
65266 State Rd. 19
P.O. Box 585
Wakarusa, IN 46573

Dear Mr. Pugh:

This responds to your letter seeking an interpretation of Standard No. 208, Occupant Crash Protection (49 CFR 571.208). More specifically, you asked about the requirements for safety belts at the various seating positions in vehicles with a gross vehicle weight rating under 10,000 pounds that you called "van conversions."

You first asked whether a "van conversion" would be classified as a passenger car, truck, or multipurpose passenger vehicle. Vehicles commonly called "vans" may be classed in four different vehicle categories (set forth at 49 CFR 571.3) for the purposes of our safety standards, depending on the configuration of the particular "van." Most cargo vans are classified as "trucks" under our safety standards, because those vehicles are "designed primarily for the transportation of property or special purpose equipment." Most passenger vans are classified as "multipurpose passenger vehicles," because they do not meet the definition of a "truck", but are "constructed on a truck chassis." Those vans that have eleven or more designated seating positions are classified as "buses," because they are "designed for carrying more than 10 persons. Finally, one minivan (the Nissan Axxess) was certified by its manufacturer as a "passenger car," because it was "designed for carrying 10 persons or less."

Additionally, the National Traffic and Motor Vehicle Safety Act places the responsibility for classifying a particular vehicle in the first instance on the vehicle's manufacturer. For this reason, NHTSA does not approve or endorse any vehicle classification before the manufacturer itself has classified a particular vehicle. NHTSA may reexamine the manufacturer's classification in the course of any enforcement actions. If you are interested in the appropriate classification for a particular van conversion, we will offer our tentative opinion if you will provide us with detailed information on the van conversion in which you are interested.

You next asked on what date safety belts were required in "van conversions," what type of safety belts, and at what locations those belts were required. As explained above, we do not class vehicles as "van conversions" for the purposes of our safety standards. If the vans were classed as passenger cars, passenger cars manufactured on or after January 1, 1968 were required to have lap/shoulder safety belts at the front outboard seating positions and either lap/shoulder or lap-only safety belts at every other seating position in the car. Beginning December 11, 1989, passenger cars were required to have lap/shoulder safety belts at both front and rear outboard seating positions, with either lap/shoulder or lap-only safety belts at every other seating position. Since September l, l989, all passenger cars are required to be equipped with automatic crash protection for outboard front-seat occupants.

Multipurpose passenger vehicles and trucks with a gross vehicle weight rating of 10,000 pounds or less manufactured on or after July 1, 1971 were required to have lap/shoulder safety belts at the front outboard seating positions and either lap/shoulder or lap-only safety belts at every other seating position in the vehicle. Beginning September 1, 1991, vans classified as multipurpose passenger vehicles or trucks (other than motor homes) must have lap/shoulder belts at both front and rear outboard seating positions, with either lap or lap/shoulder belts at all other seating positions. Motor homes manufactured on or after September 1, 1991 will continue to be required to have lap/shoulder belts at front outboard seating positions and either lap/shoulder or lap-only safety belts at every other seating position. In addition, effective September l, l99l vans must meet dynamic crash test injury criteria for the front outboard seating positions.

If the vans were classed as buses, buses manufactured on or after July 1, 1971 were required to be equipped with either a lap/shoulder or a lap-only safety belt at the driver's seating position. Beginning September 1, 1991, buses with a gross vehicle weight rating of 10,000 pounds or less (except school buses) must be equipped with lap/shoulder belts at all front and rear outboard seating positions and either lap/shoulder or lap-only safety belts at every other seating position.

Also, the agency has proposed extending the automatic crash protection requirements mentioned above to these other vehicle classifications.

I hope this information is useful. If you have any further questions or need some additional information on this subject, please contact Steve Kratzke of my staff at this address or by telephone at (202) 366-2992.

Sincerely,

Paul Jackson Rice Chief Counsel

ref:208#571 d:12/13/90