Interpretation ID: 2864yy
Acting Director
Office of Passenger
Enforcement and Facilitation
Department of the Treasury
U.S. Customs Service
Washington, D.C. 20229
Dear Ms. Lombardi:
This is in reply to your letter of February 14, l99l, asking for an opinion on kit cars.
Specifically, military and DOD civilian employees stationed on the Philippines
"frequently purchase automobiles which are composites of old chassis and engines, of U.S. manufacture, and new bodies and interiors, fabricated and attached to the chassis by local Filipino car shops. Normally, the chassis and engines were not taken abroad by the importers, but were purchased in the Philippines from other sources. In most cases the chassis are said to have been manufactured prior to January 1, l969."
You have asked which DOT regulations apply to these automobiles, those applicable to the year the chassis was manufactured, or those applicable to the year the body was attached.
This is a question of first impression with us. Under the opinions of this Office relating to the National Traffic and Motor Vehicle Safety Act, if a person meeting the definition of a "manufacturer", "distributor", "dealer", or "motor vehicle repair business" removes a body from the chassis of a motor vehicle and installs a new one, the resulting vehicle must continue to meet the Federal motor vehicle safety standards that were in effect at the time that the vehicle was originally manufactured. If a person other than the above installs the new body, the vehicle is simply a used vehicle to which no Federal motor vehicle safety standards are applicable (but which must meet State standards for vehicle registration). However, these interpretations apply only to modifications that occur within a "State" as defined by the Act. The Philippines is not included in the definition of "State."
Where such modifications have occurred outside a "State", and the modified vehicle is offered for importation into the United States, the vehicle is treated under the importation regulations (49 CFR Part 591) as a used vehicle which must be brought into conformity with Federal safety and bumper standards in effect at the time of its manufacture. We regard the date of manufacture of the original vehicle (i.e., chassis) as the appropriate date, because it may not be feasible to conform the assemblage to vehicle standards in effect at the later date on which the body was manufactured. If the original vehicle were manufactured before January 1, l968 (the effective date of the original safety standards), then no Federal motor vehicle safety standards apply to the vehicle.
I must add an important caveat here. There are two types of Federal motor vehicle safety standards: those that apply to the vehicles as a whole (such as the so-called crash standards), and those that apply to individual equipment items. The equipment standards apply regardless of the date of manufacture of the vehicle. Thus, the tires, brake fluid, brake hoses, glazing, seat belt assemblies, and lamps and reflectors on any modified vehicle imported into the United States must meet the standards in effect at the time the items were manufactured, regardless of whether the modified vehicle must meet the Federal safety standards applicable to vehicles.
I must also add two other caveats. The Imported Vehicle Safety Act of l988, which has been implemented by 49 CFR Parts 591-594, forbids the importation of a vehicle not originally manufactured to conform to the Federal motor vehicle safety standards (e.g., this would apply to an assemblage of a new body placed upon a chassis manufactured on or after January 1, l968) unless this agency has determined that the vehicle is capable of modification to comply with all applicable safety standards. This determination is made pursuant to a petition submitted by a "Registered Importer," who will undertake to conform the vehicle if a favorable determination is made. The second caveat is that the owner can import the vehicle only if (s)he has a contract with a Registered Importer to perform conformance work.
However, there is a limited exception to the two caveats of the preceding paragraph. They do not apply to any vehicle that will be imported into the United States on or before October 31, l992, if its importer owned the vehicle (or had a contract to acquire it) before October 31, l988, was employed outside the United States at all times between those two dates, and had never before imported a nonconforming motor vehicle. Under this exception, the owner may import the vehicle without the necessity of a determination or the intervention of a Registered Importer. (S)he must then bring the vehicle into compliance with all applicable Federal motor vehicle safety and bumper standards, and present evidence of conformance to this agency. Under any circumstances of importation of a noncomplying vehicle to be conformed, its owner must acquire a performance bond to ensure that the work is, in fact, completed.
If you have any further questions, we shall be pleased to answer them.
Sincerely,
Paul Jackson Rice Chief Counsel
ref:VSA#59l d:3/ll/9l