Interpretation ID: 2892o
Mill Supply Inc.
3241 Superior Avenue
Cleveland, OH 44114
Dear Mr. Schuld:
This responds to your letter asking for information concerning the application of Federal safety standards to your manufacture of a jump seat that you said would be "removable and able to be transferred from one truck to another." I apologize for the delay in responding. Generally, Federal motor vehicle seating standards apply to motor vehicles prior to their first purchase by a consumer, and not to "aftermarket" seating components added to a vehicle after such purchase. However, several of our safety standards could apply to your product if the seat is installed in a new vehicle prior to the vehicle's first sale to a consumer. Federal law would also affect your installation of the jump seat in new or used vehicles.
By way of background information, the National Highway Traffic Safety Administration (NHTSA) is authorized by the National Traffic and Motor Vehicle Safety Act to issue Federal motor vehicle safety standards that set performance requirements for new motor vehicles and items of motor vehicle equipment. NHTSA is not authorized to certify or approve motor vehicles or motor vehicle equipment for compliance with our Federal motor vehicle safety standards. Instead, under the National Traffic and Motor Vehicle Safety Act (copy enclosed), each manufacturer of a motor vehicle or item of motor vehicle equipment is responsible for certifying that its products meet all applicable safety standards. The following represents our opinion based on the information provided in your letter.
There is currently no Federal motor vehicle safety standard that is directly applicable to a removable jump seat sold directly to a consumer. Federal seating standards generally apply only to completed new motor vehicles and not to items of equipment such as a removable jump seat. However, as a manufacturer of motor vehicle equipment, you are subject to the requirements in sections 151-159 of the Safety Act concerning the recall and remedy of products with defects relating to motor vehicle safety. I have enclosed an information sheet that briefly describes those responsibilities. In the event that you or NHTSA determines that your jump seats contain a safety related defect, you would be responsible for notifying purchasers of the defective equipment and remedying the problem free of charge.
If your product will be installed on a new vehicle prior to the vehicle's first sale to a consumer, then the manufacturer of the vehicle will have certain responsibilities relating to its obligation under the Safety Act to certify the new vehicle as meeting all applicable Federal motor vehicle safety standards. Federal standards for seating systems (Standard No. 207) and crash protection (Standard No. 208) apply to designated seating positions in new vehicles. While these standards do not apply to auxiliary seating accommodations (e.g., temporary or folding jump seats), the determination must be made whether your apparatus falls into this latter category and is thus excluded from coverage. Unfortunately, information provided in your letter did not describe your jump seat in sufficient detail for us to offer an opinion as to whether your particular seat is an auxiliary seating accommodation. Photographs or engineering diagrams of your product would assist us in determining whether the seat would be considered an auxiliary seating accommodation, and thus excluded from coverage under Standard Nos. 207 and 208 if installed on new vehicles.
Another Federal standard to which the vehicle manufacturer must certify its vehicle as conforming is Standard No. 302, Flammability of Interior Materials. This standard establishes flammability requirements that must be met by certain vehicle components including seat cushions and seat backs on any occupant seat installed in a new vehicle prior to the vehicle's first sale to a consumer. A manufacturer installing your jump seat on a new vehicle would thus be required to ensure that any seat cushion or seat back on your product conforms to the flammability resistance requirements of the standard.
You should also be aware that there are statutory considerations that affect the installation of your jump seats in new and used vehicles. Section 108(a)(2)(A) of the Vehicle Safety Act specifies: "No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative ... any device or element of design installed on or in a motor vehicle or item of motor vehicle equipment in compliance with an applicable Federal motor vehicle safety standard ..." This section requires manufacturers, distributors, dealers or motor vehicle repair businesses (i.e., any person holding him or herself out to the public as in the business of repairing motor vehicles or motor vehicle equipment for compensation) installing the jump seat to ensure that the addition of the apparatus would not negatively affect the compliance of any component or design on a vehicle with applicable Federal safety standards. For example, the commercial entity must ensure that the addition of the jump seat does not degrade from the safety of existing seating or occupant protection systems on the vehicle. Section 109 of the Act specifies a civil penalty of up to $1,000 for each violation of 108.
In summary, removable jump seats sold to motor vehicle owners as items of aftermarket equipment are not subject to any Federal motor vehicle safety standard. The seat could be subject to Federal standards for seating performance and occupant crash and flammability protection if it is installed on new vehicles prior to the vehicle's first sale. Commercial businesses are prohibited from installing the jump seat if the result renders inoperative the compliance of requisite safety components or designs with Federal safety standards. Individual owners, however, are not covered by 108(a)(2)(A) and may themselves install the jump seat in their vehicles without regard to the rendering inoperative prohibition of the Safety Act. To repeat, you as the equipment manufacturer would be obligated to recall and remedy seats that contain a defect related to motor vehicle safety, even if the seats were installed by vehicle owners themselves.
Please feel free to contact us if you have further questions.
Sincerely,
Erika Z. Jones Chief Counsel
Enclosure
ref:207#302 d:8/26/88