Interpretation ID: 86-3.25

TYPE: INTERPRETATION-NHTSA

DATE: 05/16/86

FROM: AUTHOR UNAVAILABLE; Erika Z. Jones; NHTSA

TO: Earl J. Ogletree; John Gaski -- Harley Products Inc.

TITLE: FMVSS INTERPRETATION

TEXT:

Mr. Earl J. Ogletree Mr. John Gaski Harley Products Inc. 904 S Prospect Avenue Park Ridge, IL 60068 Dear Mr. Ogletree and Mr. Gaski: Thank you for your letter of March 28, 1986, asking how our regulations would affect a product you intend to manufacture both as an aftermarket item of motor vehicle equipment and as an item of original equipment on some vehicles imported into this country. You described the product as a sun visor that clips onto a vehicle's regular visor. You further explained that the sun visor has an extension arm that allows the visor to be moved to filter out the sun coming in through the window to the left of the driver, or moved below the original equipment visor or between the two original equipment visors. I hope the following discussion explains how our regulations affect your proposed visor.

Some background information on how Federal motor vehicle safety laws and regulations affect your product may be helpful. Our agency is authorized, under the National Traffic and Motor Vehicle Safety Act, to issue safety standards applicable to new motor vehicles and certain items of motor vehicle equipment. NHTSA, however, does not approve motor vehicles or motor vehicle equipment, nor do we endorse any commercial products. Instead, the Vehicle Safety Act establishes a "self-certification" process under which each manufacturer is responsible for certifying that its products meet all applicable safety standards. The agency periodically tests vehicles and equipment items for compliance with the standards, and also investigates alleged safety-related defects. As explained below, installation of your proposed sun visor in new and used vehicles would be affected by our regulations. In addition, any manufacturer of motor vehicle equipment is subject to the requirements of the Vehicle Safety Act concerning the recall and remedy of products with noncompliances or defects related to motor vehicle safety.

We have issued Federal Motor Vehicle Safety Standard No. 205, Glazing Materials, which specifies performance and location requirements for glazing used in vehicles. These requirements include specifications for minimum levels of light transmittance (708 in areas requisite for driving visibility, which includes all windows in passenger cars).

No manufacturer or dealer is permitted to install solar films and other sun screen devices, such as the sun visors described in your letter, in new vehicles without certifying that the vehicle continues to be in compliance with the light transmittance and other requirements of the standard.

After a vehicle is first sold to a consumer, modifications to a vehicle are affected by section 108(a)(2)(A) of the Vehicle Safety Act. That section prohibits commercial businesses from tampering with safety equipment installed on a vehicle in compliance with our standards. Thus, no dealer, manufacturer, repair business or distributor can install a sun screen device for the owner of the vehicle, if the device would cause the window not to meet the requirements of Standard No 205. Violation of section 108(a)(2)(A) can result in Federal civil penalties of up to $1,000 for each violation.

Section 108(a)(2)(A) does not affect vehicle owners, who may themselves alter their vehicles as they please, so long as they adhere to all State requirements. Under Federal law, the owner may install sun screening devices regardless of whether the installation adversely affects the light transmittance. However, the agency encourages vehicle owners not to install devices which could impair their vision and thus adversely affect safety. Individual States govern the operational use of vehicles by their owners and therefore it is within the authority of the States to preclude owners from using sun screens in their vehicles.

If you need further information, please let me know.

Sincerely,

Erika Z. Jones Chief Counsel

LEGAL COUNSEL NHTSB U.S. DEPARTMENT OF TRANSPORTATION ROOM 5219 400 7TH STREET S.W. WASHINGTON, D.C. 20590

DEAR SIR/MS:

I AM REQUESTING A RULING OR INFORMATION ON THE U.S. GOVERNMENTS POSITION ON THE LEGALITY OF MANUFACTURING AND SELLING A NEW TYPE OF SUN VISOR* FOR USE ON AUTOMOBILES IN THE AFTER SALE MARKET IN THE U.S. ALSO WE ARE PLANNING TO INCORPORATE THE NEW SUN VISOR AS ORIGINAL EQUIPMENT ON AUTOMOBILES MANUFACTURED IN KOREA WHICH WILL BE SOLD IN THE U.S. SOLD.

* THE NEW SUN VISOR CLIPS ONTO THE AUTOMOBILES' REGULAR VISOR. WHAT MAKES THE NEW SUN VISOR DIFFERENT IS THAT THE TINTED SUN VISOR CAN BE MOVED TO FILTER OUT THE SUN VIA AN EXTENSION ARM THAT HOLDS THE TINTED SUN VISOR WITHOUT MOVING THE REGULAR OR ORIGINAL EQUIPMENT VISOR. WITH THE NEW SUN VISOR ONE CAN FILTER OUT THE SUN AT THE LEFT SIDE DOOR WINDOW, BELOW THE ORIGINAL EQUIPMENT VISOR AND BETWEEN THE TWO ORIGINAL EQUIPMENT VISORS.

PLEASE ADVISE US AS TO WHETHER OR NOT THIS IS A FEDERAL ISSUE OR PROBLEM.

SINCERELY, EARL J. OGLETREE AND JOHN GASKI