Interpretation ID: 8935

Mr. Reuven Koter Director Baran Advanced Technologies Ltd. P.O. Box 3153 Beer Sheva 84131 Israel

Dear Mr. Koter:

We are replying to your FAX of July 21, 1993, to Mr. Van Iderstine of this agency, and are enclosing a copy of SAE J590b as you requested.

You have asked us to identify the U.S. regulations pertaining to turn signal and hazard warning signal lights including tell-tales. The applicable regulation is Federal Motor Vehicle Safety Standard No. 108, Lamps, Reflective Devices, and Associated Equipment. Standard No. 108 incorporates by reference many SAE materials, including those regarding flashers. In addition to SAE J590b (turn signal flasher, with the exceptions noted in S5.1.1.19 and S5.1.1.20 of Standard No. 108) Standard No. 108 incorporates SAE J589 (turn signal operating unit, with the exception noted in S5.1.1.13), SAE J588 (turn signal lamps for vehicles less than 2032 mm in overall width and J1395 for wider vehicles), J910 (vehicular hazard warning signal operating unit) and J945 (vehicular hazard warning signal flasher). The turn signal pilot indicator specifications are at paragraph 5.4.3 in SAE J588 and J1395. NHTSA is not contemplating rulemaking concerning any of these requirements.

We understand from Mr. Van Iderstine that you are contemplating manufacturing a device that senses the sudden release of the accelerator pedal and activates the hazard warning lamp system. Under Standard No. 108, this device is permissible as original vehicle equipment (i.e. installed at the factory, or by the dealer before sale) if it does not impair the effectiveness of any of the lighting equipment that is required by Standard No. 108. We assume that the device would be automatically deactivated when the brake pedal is applied and that manual deactivation is not required. We further assume that the device is not activated under normal stopping conditions.

Finally, we assume that manual activation of the turn signals will override the device should it be operating at the time the turn signal control is activated. Under these assumptions, we do not believe that the device would impair the effectiveness of the stop, tail, and turn signal lamps required by Standard No. 108. However, the judgment of impairment is one made by the person installing the device who must certify (or ensure that the certification remains valid) that the vehicle incorporating the device complies with all applicable Federal motor vehicle safety standards. Unless that judgment is clearly erroneous, NHTSA will not question it.

Mr. Van Iderstine advises that no further details are currently available on ECE agenda item "Regulation No. 48."

Sincerely,

John Womack Acting Chief Counsel

Enclosure

ref:108 d:9/7/93