Interpretation ID: 8951
Coordinator-Regulatory Affairs MCI/TMC
Engineering Centre
1558 Willson Place
Winnepeg, Manitoba R3T 0Y4
Dear Mr. Littler:
This responds to your FAX and phone call of July 30, 1993 to Mary Versailles of my office. Your FAX enclosed information on a vehicle, the AMF Invader, which is built on a remanufactured MCI chassis, and advertised and sold as a new vehicle. You do not believe that such a vehicle should be considered a new vehicle. As Ms. Versailles explained on the phone, we can explain whether such a vehicle would be considered a new vehicle for purposes of laws and regulations administered by this agency, and the implications of such a determination. I suggest you also contact the Federal Trade Commission concerning whether it is appropriate to advertise this vehicle as new. To determine whether this vehicle can be titled and registered as new, you would have to contact the various states concerning their laws.
By way of background information, the National Highway Traffic Safety Administration (NHTSA) is authorized under the National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1381 et seq.; Safety Act) to issue Federal motor vehicle safety standards that apply to the manufacture and sale of new motor vehicles and new items of motor vehicle equipment. Section 108(a)(1)(A) of the Safety Act (15 U.S.C. 1397(a)(1)(A)) prohibits any person from manufacturing, introducing into commerce, selling, or importing any new motor vehicle or item of motor vehicle equipment unless the vehicle or equipment item is in conformity with all applicable safety standards. NHTSA, however, does not approve motor vehicles or motor vehicle equipment, nor does it endorse any commercial products. Instead, the Safety Act establishes a self-certification process under which each manufacturer is responsible for certifying that its products meet all applicable safety standards.
After a vehicle's first retail sale, a provision affecting its modification is section 108(a)(2)(A) of the National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1397(a)(2)(A)) which provides:
No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative, in whole or in part, any device or element of design installed on or in a motor vehicle ... in compliance with an applicable Federal motor vehicle safety standard.
It is possible that modifications on an existing vehicle may be so substantial that the resulting vehicle would be a new vehicle for purposes of compliance with the safety standards. In this case, the new vehicle would be required to be certified by its manufacturer as complying with all applicable safety standards in effect on its date of manufacture, just like every other new vehicle. This date would be the date such modifications were completed.
The agency has stated that a bus built with a new body is not considered a "new" vehicle if, at a minimum, the engine, transmission, and drive axle(s) are not new and at least two of these three listed components are taken from the same used vehicle (see, for example, August 11, 1987 letter to Mr. Ernest Farmer). The agency has also stated that a bus constructed from an old body and a new chassis is a new vehicle (see, for example, July 17, 1981 letter to Mr. Larry Louderback). When neither the body nor the chassis are completely new, the agency looks to see if the vehicle has so deviated from the original components and attributes that it may be considered a new vehicle, and one for which compliance with the safety standards is legally required, or whether it has retained a sufficient number of components and characteristics to be considered a used vehicle (see, for example, April 22, 1991 letter to Mr. Kent Morris).
You enclosed an article titled "The New Invader" from the August 1993 issue of National Bus Trader magazine. The manufacturing process for the Invader is described beginning on page 14. Page 16 of this article states, "the Invader is supplied with a new engine," but the article does not contain enough information to determine whether the vehicle, which includes both new and old parts, would be considered new. If the Invader has a new body, NHTSA would considered the vehicle to be new if the chassis lacks the used components referenced in the Farmer letter. Any new vehicle must be certified as complying with all applicable safety standards in effect on the date of manufacture before the vehicle can be sold in the United States.
I hope you find this information helpful. If you have any other questions, please contact Mary Versailles at this address or by phone at (202) 366-2992.
Sincerely,
John Womack Acting Chief Counsel
cc: AMF 1830 LeBer Street, Montreal Quebec, Canada H3K 2A4 ref:571 d:1/10/94