Interpretation ID: 9251
VML and Colonna Corp.
2122 - 65th St.
Brooklyn, NY 11204
Dear Mr. Grabasky:
This is reply to your recent letter asking our views on the use of decorative neon lamps, or of oscillating or revolving ones.
This agency establishes the Federal motor vehicle safety standards which must be met from the time a motor vehicle is manufactured up until its sale to its first purchaser for purposes other than resale. The new car dealer is responsible for ensuring that any lighting equipment that it adds before the sale of the vehicle does not impair the effectiveness of lighting equipment that is required by the standard. The determination of whether an impairment exists is made by the person responsible for adding the equipment. If this determination appears clearly erroneous, NHTSA will question it. In addition, all lighting equipment added before the vehicle's first sale must be steady burning when it is used.
If the lighting equipment is added after the vehicle's sale by a manufacturer, dealer, distributor, or motor vehicle repair business, it is subject to the restriction that it not "render inoperative, in whole or in part" any lamp that has been installed in accordance with Standard No. 108.
Supplementary motor vehicle lighting equipment, whether added before or after initial sale of the vehicle, is subject to the laws of States in which the vehicle is operated, even if the equipment is not prohibited under Federal law.
With respect to neon lights, we are aware of aftermarket installations on the underside of vehicles that illuminate the pavement below. If such lamps create glare that distracts another motorist from perceiving, for example, the turn signals in use, we would consider that an impairment and a partially rendering inoperative within the meaning of those terms. We are unable to advise you on State laws regarding the use of neon lights on vehicles, and suggest that you write for an opinion to the American Association of Motor Vehicle Administrators, 4600 Wilson Boulevard, Arlington, Va. 22203.
We are unsure what you mean by "oscillating" but Standard No. 108, in general, requires lamps added before a vehicle's initial sale to be steady burning in use, unless otherwise permitted (such as turn signals and hazard warning signals, and automatic flashing of headlamps for signalling purposes). Installation of a non steady burning lamp by a manufacturer, dealer, distributor, or motor vehicle repair business after initial sale could be viewed as a rendering inoperative depending upon the circumstances. Standard No. 108 does allow a motorcycle to be equipped with a modulating headlamp for daytime use. The modulation permitted is 240 +/- 40 cycles per minute. When NHTSA proposed to allow the modulating headlamp, some commenters were concerned that the flashing might trigger a photic reaction akin to an attack of epilepsy, in onlookers. We believe that the reaction is most likely to occur at a frequency of 10 hz against a very dark background. Thus, care should be taken in the use of supplementary lamps that are not steady burning.
As for revolving lamps, we believe that these are generally found on police and emergency vehicles such as ambulances and tow trucks. Whether it is permissible to equip a vehicle with these lamps and to use them is a question to be answered under State law.
Sincerely,
John Womack Acting Chief Counsel
ref:108 d:11/16/93