Interpretation ID: 9449
8801 Ravenna Avenue, NE
Seattle, WA 98115
Dear Mr. Matulich:
This responds to your letter requesting information about Federal requirements applicable to your product. According to promotional literature that accompanied your letter, your "Clear Vu Mirror" is an attachment to exterior mirrors that clears raindrops, dust, and mist, thus making a mirror "virtually self-cleaning." I am pleased to explain the applicability of our regulations to your product.
By way of background information, the National Highway Traffic Safety Administration (NHTSA) is authorized to issue Federal Motor Vehicle Safety Standards (FMVSSs) that set performance requirements for new motor vehicles and items of motor vehicle equipment. NHTSA does not, however, approve or certify any vehicles or items of equipment. Instead, the National Traffic and Motor Vehicle Safety Act ("Safety Act") establishes a "self-certification" process under which each manufacturer is responsible for certifying that its products meet all applicable FMVSSs.
NHTSA currently has no FMVSSs that directly apply to the product you plan to manufacture. NHTSA issued an FMVSS for vehicle rearview mirrors (FMVSS No. 111), but the standard applies to new vehicles, and not to aftermarket mirror products. If your product were manufactured and sold as part of a new vehicle, the vehicle would have to be certified as complying with all applicable standards, including Standard No. 111. The standard sets field of view requirements for new motor vehicles, and your product would have to be mounted on a new vehicle such that it does not block the field of view required by FMVSS No. 111. However, since Standard No. 111 applies only to new vehicles, it does not apply to your product.
I note, however, that there are other Federal requirements that indirectly affect you and your product. Under the Safety Act, your product is considered to be an item of motor vehicle equipment. As a manufacturer of motor vehicle equipment, you are subject to the requirements in 151-159 of the Safety Act concerning the recall and remedy of products with safety related defects. I have enclosed an information sheet that briefly describes those responsibilities. In the event that you or NHTSA determines that your product contains a safety- related defect, you would be responsible for notifying purchasers of the defective equipment and remedying the problem free of charge.
In addition, manufacturers, distributors, dealers, and motor vehicle repair businesses are subject to 108(a)(2)(A) of the Safety Act, which states: "No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative ... any device or element of design installed on or in a motor vehicle or item of motor vehicle equipment in compliance with an applicable Federal motor vehicle safety standard ...." It is conceivable that your product, when placed on a vehicle's exterior mirror, could "render inoperative" the vehicle's ability to comply with FMVSS No. 111. Persons in the aforementioned categories cannot install your product if it blocks the field-of-view required by FMVSS No. 111, or otherwise caused the vehicle to no longer comply with Standard No. 111.
The "render inoperative" prohibition of 108(a)(2)(A) does not apply to the actions of vehicle owners in adding to or otherwise modifying their vehicles or items of motor vehicle equipment. Thus, if your product were placed on an exterior mirror by the vehicle owner, the render inoperative provision would not apply. Nevertheless, NHTSA urges vehicle owners not to degrade the safety of any system or device on their vehicles, including the safety of their rearview mirrors.
I hope you find this information helpful. If you have any other questions, please contact Marvin Shaw of my staff at this address or by phone at (202) 366-2992.
Sincerely,
John Womack Acting Chief Counsel
Enclosure ref 111 d:4/7/94