Interpretation ID: nht68-3.15

DATE: 05/15/68

FROM: AUTHOR UNAVAILABLE; William Hadden, Jr.; NHTSA

TO: Mercedes Benz of America, Incorporated

TITLE: FMVSS INTERPRETATION

TEXT: Thank you for your telegram of May 3, 1968, concerning the use of tabular-type bulbs to back the requirements of Federal Motor Vehicle Safety Standard No. 108.

Paragraph S3.1 and Tables I and III of Standard No. 108, as amended (32 F.D. 13933, December 10, 1967), specify that certain lamp assemblies such as license plate lamps, backup lamps and tail lamps, shall conform to the basic SAE Standards for the lamp assemblies. These basic standards in turn refer to SAE Standard 7573 on bulbs and to SAE Standard 3567 on bulb sockets. This relationship between the basically referenced standards and subreferenced standards has been the subject of prior communications with the industry and appears to be in need of clarification.

The basically referenced SAE Standards also refer to SAE Standard J575, "Test for Motor Vehicle Lighting Devices and Components." Paragraph "C" of SAE Standard J575 states in part as follows: "Where special bulbs are specified, they should be submitted with the devices and the same or similar bulbs used in the tests and operated at their rated mean epherical candlepower." This provision of SAE Standard J575 permits the use of special bulbs, including tubular-type bulbs, which do not conform to the detailed requirements of Table I of SAE Standard J573. It also follows that the sockets for these special bulbs need not conform to SAE Standard J567. I must emphasize, however, that these provisions for special bulbs in no way except the lamp assemblies from testing all performance requirements specified in Standard No. 108, including those specified in the basically referenced SAE Standards and in subreferences SAE Standard J575.

In view of the several inquiries we have resolved on this particular(Illegible Word) of the requirements of Standard No. 108, we anticipate that an official interpretation, providing the clarification presented in this letter, will be published in the Federal Register in the near future.

Thank you for your continued interest in the Federal Motor Vehicle Safety Standards.