Interpretation ID: nht73-2.46
DATE: 12/10/73
FROM: AUTHOR UNAVAILABLE; R. B. Dyson; NHTSA
TO: Hyattsvile Auto Glass
TITLE: FMVSS INTERPRETATION
TEXT: This is in response to your November 29, 1973, request to know if urethane bonding material must be used in the installation of windshields in new motor vehicles not yet sold to a first purchaser for purposes other than resale.
Standard 212, Windshield mounting, is a performance standard for new motor vehicles. We do not require the use of specific bonding materials such as urethane, but only that the vehicle conform to Standard 212, whatever material is used. The New York suit you mentioned may involve a question of due care in the installation of the windshield, separate from the question of meeting a Federal minimum performance standard.
YOURS TRULY,
IHyattsville Auto Glass
NOVEMBER 29, 1973
ROBERT DYSON ASST. CHIEF COUNSEL NATIONAL HWY. SAFETY STANDARDS
DEAR MR. DYSON:
AFTER TALKING WITH YOU BY TELEPHONE ABOUT A STATEMENT MADE BY GENERAL MOTORS IN ONE OF THEIR BULLETINS ON THE USING OF URETHANE TO INSTALL WINDSHEILDS, I WAS TOLD OF A GLASS SHOP IN NEW YORK THAT IS BEING SUED BECAUSE THEY DIDN'T USE URETHANE IN THE INSTALLATION OF A WINDSHEILD OF A 1974 MODEL VEHICLE THAT WAS INVOLVED IN AN ACCIDENT.
I UNDERSTAND THAT SAFETY STANDARD 212 ONLY PERTAINS TO NEW VEHICLES NOT HAVING BEEN SOLD, AS WAS EXPLAINED IN YOUR LETTER OF JULY 20, 1972. IS THERE ANY REGULATION THAT SAYS THAT A WINDSHEILD BEING INSTALLED IN A NEW 1974 MODEL VEHICLE (ONE NOT SOLD TO A FIRST PURCHASER) HAS TO BE INSTALLED WITH URETHANE BONDING MATERIAL? OR ARE WE STILL ALLOWED TO USE THE BONDING MATERIAL OF OUR CHOICE AS LONG AS IT CONFORMS TO STANDARD 212?
I WOULD APPRECIATE ANY FURTHER ASSISTANCE YOU CAN GIVE US BECAUSE OF THE APPARENT HAZARDS AND LENGTH OF CURING TIME WE DON'T WANT TO USE URETHANE UNLESS WE ARE REQUIRED TO BY YOUR DEPARTMENT.
AGAIN I WOULD LIKE TO THANK YOU FOR THE ASSISTANCE YOU HAVE GIVEN US IN THIS AS IN PREVIOUS MATTERS.
SINCERLY YOURS
ROBERT WOOD PUBLIC RELATIONS