Interpretation ID: nht78-4.29
DATE: 04/13/78
FROM: JOSEPH J. LEVIN -- NHTSA CHIEF COUNSEL
TO: MOE PARE -- DIRECTOR OF DESIGN CARS & CONCEPTS, INC.
TITLE: NOA-30
ATTACHMT: ATTACHED TO LETTER DATED 06/26/89 FROM STEPHEN P. WOOD -- NHTSA TO MELANIE TURNER; REDBOOK A33 [2]; STANDARD 205; LETTER DATED 08/31/84 FROM FRANK BERNDT -- NHTSA TO TOYOTA MOTOR CORPORATION; STANDARD 205; LETTER DATED 11/03/88 FROM MELANIE TURNER TO ERIKA Z. JONES -- NHTSA; OCC 2777
TEXT: Dear Mr. Pare:
This responds to your letter of February 16, 1978, asking whether the certification markings required on glazing materials by Safety Standard No. 205 must remain visible from the interior or exterior of a vehicle after installation.
The answer to your question is no. There is nothing in the certification requirements of section S6 of Standard No. 205 that requires the markings to remain visible after installation on the vehicle. As long as the glazing manufacturer has certified and marked his glazing in accordance with the standard and as long as these markings are not removed by the vehicle manufacturer there is no prohibition against covering the markings.
Sincerely,