Interpretation ID: nht81-2.38

DATE: 06/23/81

FROM: AUTHOR UNAVAILABLE; Frank Berndt; NHTSA

TO: Midwest Polychem, Ltd.

TITLE: FMVSS INTERPRETATION

TEXT: We have examined the proposed label for "GRC" brake fluid you have submitted to us for comment.

Generally, the label appears to meet the requirements of paragraph S5.2.2 of Motor Vehicle Safety Standard No. 116 (36 F.R. 11937, June 24, 1971, as amended, 36 F.R. 21594, November 11, 1971). The words "or(Illegible Word)" in your conformity statement are redundant; since the standard is a minimum requirement, "conforming to" and "exceeding" it mean exactly the same thing. If the fluid packager is an entity other than Curley, the packager's name or code identification must appear either below Gurley's name or on the bottom of the can. We assume that the required serial number identifying the packaged lot and date of packaging will be stamped either below Gurley's name or on the bottom of the can.

GRC

SUPER HEAVY DUTY

BRAKE FLUID DOT 3 MOTOR VEHICLE BRAKE FLUID 284 degrees F Min. Wet Boiling Point

GRC

HYDRAULIC BRAKE FLUID

DIRECTIONS

FILLING: Check fluid each month or every 2000 miles. Fill Mailer cylinder to within one-half inch of top.

BLEEDING: Remove plug from bleeder screw and insert bleeder hose. Place other and of bleeder in clean container partially filled with G.R.C. Brake Fluid. Lossen bleeder screw and pump brake pedal slowly until air bubbles stop and fluid is clear. Tighten blender screw and follow same instructions on all four wheels, Moster cylinder fluid level must be checked after bleeding each wheel and keep fluid level to within 1/2 inch of top.

CAUTION: FOLLOW VEHICLE MANUFACTURER'S RECOMMENDATIONS WHEN ADDING BRAKE FLUID.

KEEP BRAKE FLUID CLEAN AND DRY. Contamination with dirt, water petroleum products or other materials may result in brake failure or costly repairs.

STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ABSORPTION OF MOISTURE.

CAUTION: DO NOT REFILL CONTAINER AND DO NOT USE FOR OTHER LIQUIDS.

(Illegible Lines) GURLEY REFINING DESIGN GCR SUPER HEAVY DUTY BRAKE FLUID (Illegible Word) 2700-1 S.O. 244-3191 SIZE 211 X 407.5 C.E. 4.595 X 8.364 B.P. DATE 10-19-71

(Illegible Lines) (Illegible Word) AS DETAINED APPROVED AS SUBMITTED CUSTOMER SIGNATURE: DATE NO. PROOFS 20 PROOF DATE 11-3-71 CHANGE A CHANGE B CHANGE C ARTIST D/TCA