Interpretation ID: nht81-3.4

DATE: 08/04/81

FROM: AUTHOR UNAVAILABLE; F. Berndt; NHTSA

TO: Jean's Portable Highchair & Car Seat

TITLE: FMVSS INTERPRETATION

TEXT: Your letter to Mr. Vladislav Radovich was forwarded to my office for a reply. You wrote concerning information on Federal regulations applicable to child restraint systems. In particular, you were seeking agency approval for the child restraint system you propose to market.

Manufacturers of items of motor vehicle equipment, such as child restraints, are regulated by the National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1381 et seq.), a copy of which is enclosed. The Act does not authorize the agency to approve products. Section 114 of the Act requires "self-certification" by manufacturers that their product complies with all applicable Federal motor vehicle safety standards.

In the case of your product, the applicable standard is No. 213, Child Restraint Systems. The new version of that standard, which went into effect on January 1, 1981, requires manufacturers to certify that their child restraint system can meet the dynamic test and other requirements of the standard. I have enclosed a copy of Standard No. 213 for your reference.

As you requested, I am returning the pictures enclosed with your letter. If you have any further questions, please let me know.

ENCLS.

July 15, 1981

Vladislav Radovich Office of Crashworthiness National Highway Traffic Safety Admin.

Dear Mr. Radovich:

We are enclosing copies of two of the letters we have sent out to get our car seat approved.

It was suggested that we write to you for your approval and to also get a copy of your Standard 213 Child Restraint Systems.

Statement of Facts:

1. This baby seat made of tough coated nylon is also anchored to metal car seat by one inch webbing and is absolutely safe.

2. With the use of car seat belts this car seat becomes the safest car seat available today and will protect the child just as securely as the adults are protected. With the use of "car seat belts" it will stand any collision teast.

3. Jean's Car Seat can be used in the front seat and is as safe as the back seat as long as "car seat belts" are used. (See brochure) This is a must with Jean's Portable "Car Seat" just as it is with other restraint units.

Picture #1 - I have sent this picture to show the 1 1/2" webbing anchor strap - the black one extending below the baby seat. This is to be used in cars in the back seat, that do not have shoulder straps. The lap seat belt must be threaded through the anchor strap which can be lengthened or shortened as needed and this keeps the top of the seat from going forward in a collision and is extra protection as the lap seat belt must go over the chair as is shown in the brochure under "Car Seat".

Picture #3 - shows shoulder seat belts in rear seat.

We sincerely hope you will advise us of your ideas and that you will approve our car seat. Please return pictures.

Willis. R. Dunkley Jean's Portable High Chair & Baby Products

June 4, 1981

Karl C. Clark Office of Vehicle Standards & Restraints

Dear Sir,

Your Mr. Robert Ingersol of the Safety Department at Salt Lake City, Utah, has referred your name to me as one who can advise me concerning the car seat and the safety factors involved when it is used as a restraining unit. The item is called "4 in one" Jean's Portable Highchair because it is not only a portable highchair but can be used as a car seat and a back pack and a cuddly coo.

You can see by the pictures enclosed it is an item we hope will assist many families in handling their young children. Our daughter, Jean, designed the unit and we added the car seat which if used properly with car seat belts will be perfectly safe. While it does not have the appearance of being as comfortable as many car seats on the market it does hold the child firm and yet is very comfortable and as safe as any adult in the car who uses "safety belts."

We need your advice in the matter and your suggestions when used as a "child restraintment". As you will note by the pictures, the car seat with the portable highchair attached can be set on a chair at the table instead of fastening it to the regular chair or a bench in the restaurant etc. It is also a very good back pack for babies and a cuddly coo. Thus it is a very practical item and will take care of the entire baby needs. We do not sell it as a plush item but a practical and convenient unit most young families can afford. As you will note the car seat folds up which makes it convenient as it folds into a small space when not in use. We have also enclosed most of the metal parts in a rubber covering which makes it very practical when sitting on car seats and furniture. We feel it has a marketable use for families and can be approved as a very safe car restraintment for children from 3 months until 2 years.

We will certainly appreciate an immediate reply on your judgement and ideas.

Thank you. Please return the pictures. . .

Willis R. Dunkley Jean's Portable Highchair & Car Seat

July 1, 1980

Michael A. Brown Consumer Product Safety Commission

Dear Mr. Brown:

Last summer my daughter Jean Brown was home from Germany for two months, she and her husband, a dentist, are spending three years in Viesbaden, Germany, to repay Uncle Sam for an Air Force scholarship they used for schooling in Washington. While home for two months she devised a portable high chair (see picture) later we turned it into a 3 in 1 - a portable high chair, a baby back-pack, and a cuddly coo. It seems safe and properly made for these items and people who use it love it. The patent is pending. Still further we have made a car seat from steel tubing which supports the portable high chair and which when fastened to the car seat belt provides a car seat which is comfortable, easy to handle, safe and light in weight and when not in use foldsup and it can be stored in small areas or placed in trunk of a car easily and handily. In addition when unstrapped from the seat belt it can be carried with the baby to a restaurant or other chairs and provides an opportunity for the baby to sit at the table with the parents. It can also be used on church pews or any seat or bench for that matter.

We have a Distributing Company in Phoenix as well as a lot of local stores who will purchase the 3 in 1 as well as the 4 in 1 units if it is a satisfactory consumer product and has your approval.

My daughter and her husband have two more years of school in Philadelphia for him to become an Orthodonist and they need all the help possible and for this reason, as their father, I am attempting to assist them with the "Jean's Portable High Chair."

From the pictures you can see our plans. We may have to change some buckles and the positive fasteners on the car seat need some refining etc. but the patent attorney has really encouraged us. Under seperate cover we are shipping it for your testing and approval. We need your guidance. Insurance Companies have already given us liability insurance and we have companies who will produce the portable high chair and a second manufacturing company who will tool up and produce the car seat on a mass production basis. The Phoenix distributing company now works with chain stores such as Skaggs, J.C. Penneys, etc and our hopes are already very high so we hope it meets with your approval. Jean's Portable High Chairx And Baby Products Inc., Willis R. Dunkley

Enclosure Omitted.