Interpretation ID: nht93-4.21

DATE: June 3, 1993

FROM: Richard Glover -- Director of New Product Development, Evenflo Juvenile Furniture Company, Inc.

TO: Deirdre Fujita -- NHTSA

TITLE: None

ATTACHMT: Attached to letter dated 10/20/93 from John Womack to Richard Glover (A41; Std. 213)

TEXT:

I had attempted to call you concerning the possibility of including a bar code which could be automatically scanned at the bottom of the Car Seat Registration Card which consumers fill out. This bar code would contain model number, date of manufacturer, and serial number for the product that the card represents. We feel that by adding an automatically scanned bar code section to the card, that it will eliminate the possibility of mis- keying any of this information, in as much as the human element has been removed from the card. We would request a white section to be allowed in the portion of the card which is currently specified to be a 10 percent minimum gray scale background. I have sent you a mock up of the possible location that this bar code may reside in, for your consideration. We have noticed on the cards which are coming back to us at Evenflo so far, that if any postal damage has occurred to the card, that is very likely to occur on the bottom edge of the card. As a result of that, it may be more advantageous to move this white space into the area immediately below the area that the consumer fills in. It would be approximately the same width as the zone that the consumer fills in, and simply be a white space slightly further down into the card. It would leave the gray background around the outside perimeter of the card and would allow us space to openly print the model number, date of manufacture, and serial number in case there were any difficulties in bar code reading.

I would appreciate your consideration of this matter. Please advise us, as we are near the point of having to print additional cards at this time, and release printing lots to our printing company are at a rate of 500,000 cards per lot. If this will require a petition for a change in the current rules, please advise me so that we may petition as soon as possible. I remain,

Attachment (Child Restraint Registration Card) omitted.