Interpretation ID: nht94-1.50

TYPE: Interpretation-NHTSA

DATE: February 10, 1994

FROM: John Womack -- Acting Chief Counsel, NHTSA

TO: David Shapiro -- RV Designer Collection, Woodbridge, Inc.

TITLE: None

ATTACHMT: Attached to letter dated 11/17/93 from David Shapiro to NHTSA Chief Counsel (OCC-9358)

TEXT:

This responds to your inquiry about the applicability of Standard No. 302, Flammability of Interior Materials to aftermarket products. You state that you are planning to market fabric window coverings such as drapes and fabric bedding such as bedspreads for use in recreational vehicles. In response to your request for confirmation that Standard No. 302 does not apply to aftermarket products, I am pleased to have this opportunity to explain our regulations to you.

By way of background information, NHTSA is authorized to issue Federal Motor Vehicle Safety Standards that set performance requirements for new motor vehicles and items of motor vehicle equipment. NHTSA does not, however, approve or certify any vehicles or items of equipment. Instead, the Safety Act establishes a "self-certification" process under which each manufacturer is responsible for certifying that its products meet all applicable safety standards. The agency periodically tests new vehicles an d items of equipment for compliance with the standards.

In response to your question, there are currently no Federal motor vehicle safety standards (FMVSS's) that directly apply to the products you wish to manufacture. Under the authority of the Safety Act, NHTSA has issued Standard No. 302, which specifies requirements for the flammability resistance of materials in the occupant compartment of new vehicles. However, Standard No. 302 would not apply to your products because that standard applies to new motor vehicles and not to aftermarket items of motor ve hicle equipment.

I note, however, that there are other Federal requirements that indirectly affect the manufacture and sale of your products. Under the Safety Act, your products are considered to be items of motor vehicle equipment. As a manufacturer of motor vehicle e quipment, you are subject to the requirements in S151-159 of the Safety Act concerning the recall and remedy of products with safety related defects. I have enclosed an information sheet that briefly describes those responsibilities. In the event that you or NHTSA determines that your products contain a safety-related defect, you would be responsible for notifying purchasers of the defective equipment and remedying the problem free of charge. I note that even though Standard No. 302 would not apply t o your product, the product's flammability characteristics could be relevant to whether it contained a safety related defect.

Manufacturers, distributors, dealers, and motor vehicle repair businesses are subject to S108(a)(2)(A) of the Safety Act, which states: "No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative...any vehi cle or item of motor vehicle

equipment in compliance with an applicable Federal motor vehicle safety standard...." This section would prohibit any manufacturer, distributor, dealer, or repair business from installing your product in used vehicles if the effect of such installation was to render inoperative the compliance of the vehicle with any safety standard, including Standard No. 302.

The "render inoperative" prohibition of S108(a)(2)(A) does not apply to the actions of vehicle owners in adding to or otherwise modifying their vehicles or items of motor vehicle equipment. Thus, if your products were placed in vehicles by the vehicle o wners, your products would not need to meet any FMVSSs. Nevertheless, in the interest of safety, we suggest you consider conforming your product to a flammability resistance standard equivalent to Standard No. 302.

I hope this information is helpful. If you have any further questions about NHTSA's safety standards, please feel free to contact Marvin Shaw of my staff at this address or by telephone at (202) 366-2992.