Interpretation ID: nht94-3.23

TYPE: INTERPRETATION-NHTSA

DATE: June 6, 1994

FROM: Hellfried Sandig, Reitter & Schefenacker GMBH & Co. KG

TO: Richard van Iderstine

TITLE: NONE

ATTACHMT: Attached to letter dated 7/8/94 from John Womack to Hellfried Sandig (A42; STD 108)

TEXT: I have your Fax-Nr. from Mr. Althoff/Holla. We are manufacturer from lighting equipments too and we have a rear combination lamp with one stop lamp and two tail lamps.

My question:

is if necessary, that we must have the ratio 5:1/3:1 between the stop and the tail lamp measurements in this arrangement?

In the past, we had only a combination stop/tail with a 32/3 CP filament lamp. And with ECE Reglement No. 7 we don't have this problem.