Interpretation ID: nht94-4.53

TYPE: INTERPRETATION-NHTSA

DATE: October 14, 1994

FROM: Randal Busick -- President, Vehicle Science Corporation

TO: Mary Versailles, Esq. -- Office of the Chief Counsel, NHTSA

TITLE: Re: Request for interpretation of FMVSS 208 S7.1.2

ATTACHMT: Attached to 1/5/95 letter from Philip R. Recht to Randal Busick (A43; Std. 208; Std. 210)

TEXT: Dear Ms Versailles:

This is to request a clarification of FMVSS 208 S7.1.2. More specifically, would a seat belt system as shown on the attached drawing be in compliance with S7.1.2 as a so-called "semi-integrated" seat belt?

As shown on the drawing, the inboard lower FMVSS 210 anchorage, n1 is located on the seat frame and thus, as the seat moves fore and aft, the system allows a minimum of two seat belt adjustment positions and the distance between the two extreme adjustmen t positions of the system is more than 5 cm.

n1 The belt which holds the buckle is attached to this inboard anchorage.

We look forward to your response. If you have any questions, kindly contact the undersigned.

Sincerely

Enclosure

(Drawing omitted.)