Interpretation ID: nht94-5.2

TYPE: INTERPRETATION-NHTSA

DATE: December 7, 1994

FROM: Philip R. Recht -- Chief Counsel, NHTSA

TO: Yoshiaki Matsui -- Manager, Legal & Homologation Section, Stanley Electric Co. Ltd.

TITLE: None

ATTACHMT: ATTACHED TO LETTER DATED 11/16/94 FROM YOSHIAKI MATSUI TO PATRICK BOYD

TEXT: We have received your letter of November 16, 1994, to Patrick Boyd of this agency, asking for an interpretation of the final rule that amended Motor Vehicle Safety Standard No. 108 on November 2, 1994.

The rule amended S5.1.2(c) to specify, in pertinent part, that "after the outdoor exposure test, plastic materials used for reflex reflectors . . . shall not show . . . haze that exceeds 7 percent. . . ." The amendment is effective November 1, 1995. You have presented two fact situations with respect to replacement reflex reflectors, and ask whether the amended haze requirement is applicable in each case. These are:

"First case - replacement reflex reflectors manufactured after the effective date, but the vehicle to which the reflex reflectors are fitted is no longer manufactured after the effective date."

Motor vehicle replacement equipment is governed by S5.8 of Standard No. 108. S5.8.1 requires that any reflective device manufactured to replace any reflective device on any vehicle to which Standard No. 108 applies shall be designed to conform to Standar d No. 108. Paragraphs S5.8.2 through S5.8.9 permit certain specified items of replacement equipment to be manufactured to original equipment specifications (e.g., earlier versions of SAE standards no longer specified for original equipment on motor vehi cles); however, reflex reflectors are not included among them. This means that any reflex reflectors manufactured on and after November 1, 1995, whether original or replacement, must conform with the 7 percent haze limitation, regardless of the date of manufacture of the vehicle.

"Second case - Replacement reflex reflectors manufactured before the effective date, which may be fitted to a vehicle manufactured before or after the effective date. (In this case, the same type of vehicles are manufactured before and after the effe ctive date continuously.)"

A replacement reflex reflector manufactured either before or after November 1, 1995, is subject to the requirement that the plastic materials used in them shall show no haze in a visual inspection after the outdoor exposure test because that is the requi rement in effect at the time the replacement reflex reflector is manufactured.

As a practical matter, it would appear to make no difference when the reflector was manufactured or to which specification. The amendment is not intended to change manufacturing techniques or composition of plastics materials in any way. Because it is impossible not to have some degree of haze at the end of the three-year test period, Standard No. 108 was amended to make it more objective and practicable, and the measured haze limit raised to 7 percent, at which point haze is visible to the naked eye.