Interpretation ID: aiam2877
Chief Engineer
Bridgestone Research Inc.
350 Fifth Ave.
Suite 4202
New York
NY 10001;
Dear Mr. Yoneyama: This is in response to your letter of September 22, 1978, askin whether tires listed in Table 1-A of Appendix A, Federal Motor Vehicle Safety Standard No. 109, *New Pneumatic Tires - Passenger Cars*, must comply with Part 575.104, *Uniform Tire Quality Grading Standards*, (UTQGS), if the tires are installed as original equipment on multi-purpose passenger vehicles. You also inquire as to the effective dates for the provision of UTQGS information to first purchasers of new motor vehicles under Part 575.104(d)(1)(iii).; UTQGS applies to a tire type whose predominant contemplated use is o passenger cars, even if the manufacturer knows the tire type is also used as original equipment on multi-purpose passenger vehicles. A manufacturer's determination to certify a tire as conforming to Standard No. 109, will also determine the tire's classification for purposes of UTQGS. Thus, UTQGS would apply to any tire labeled with a size designation listed in Appendix A of Standard No. 109, other than a deep tread, winter-type snow tire or space- saver or temporary use spare tire, regardless of the tire's actual use.; On October 23, 1978, NHTSA issued a *Federal Register* notice (cop enclosed) granting the petition of American Motors corporation to revise the effective dates for Part 575.104(d)(1)(iii) to September 1, 1979 for bias-ply tires and March 1, 1980 for bias-belted tires. On the basis of this change, your statement regarding effective dates is correct.; Sincerely, Joseph J. Levin, Jr., Chief Counsel