Interpretation ID: 7117
Reuss Engineers, Inc.
P.O. Box 22
Waltz's Mills
Madison, PA 15663
Dear Mr. Reuss:
This responds to your letter addressed to Barry Felrice, NHTSA's Associate Administrator for Rulemaking, concerning your recently patented vehicle that is designed to transport passenger cars. You requested information about which specific regulations and standards would be applicable to your vehicle. I am pleased to have this opportunity to explain our regulations. I am also enclosing the agency's general information fact sheet for new manufacturers and a booklet entitled "Federal Motor Vehicle Safety Standards and Procedures," which summarizes the basic requirements of our safety standards and shows which standards apply to various vehicle types.
You explained that your vehicle consists of a chassis with a gross vehicle weight rating (GVWR) greater than 10,000 pounds and a structural frame between the cab and rear wheels. This frame includes moveable forks that can be extended from the framework and inserted beneath a passenger car's tires. The forks can be raised and retracted into the framework, thus allowing your vehicle to transport the passenger car.
The National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1397(a)(2)(A); the Safety Act) authorizes this agency to issue safety standards applicable to new motor vehicles and new items of motor vehicle equipment. All motor vehicles and items of motor vehicle equipment manufactured or imported for sale in the United States must comply with all applicable safety standards. Manufacturers of motor vehicles must certify compliance of their products in accordance with 49 CFR Part 567, Certification. I note that you may be considered a "final-stage manufacturer" under Part 568, Vehicles Manufactured in Two or More Stages, because you purchase the chassis. Section 102(3) of the Safety Act defines the term "motor vehicle" as follows:
"any vehicle driven or drawn by mechanical power manufactured primarily for use on the public streets, roads, and highways, except any vehicle operated exclusively on a rail or rails."
Based on the description in your letter, it appears that your vehicle is a motor vehicle under the Safety Act. More specifically, it appears that your vehicle would be considered a "truck" under the agency's regulations. The term "truck" is defined, at 49 CFR Part 571.3, as "a motor vehicle with motive power, except a trailer, designed primarily for the transportation of property or special purpose equipment."
Accordingly, your vehicle must comply with all Federal motor vehicle safety standards that are applicable to trucks with a GVWR greater than 10,000 pounds and be certified as conforming to those standards.
I hope this information is helpful. If you have any further questions about NHTSA's safety standards, please feel free to contact Marvin Shaw of my staff at this address or by telephone at (202) 366-2992.
Sincerely,
Paul Jackson Rice Chief Counsel
Enclosure
ref: VSA d:4/29/92