Pasar al contenido principal
Search Interpretations

Interpretation ID: 2777y

Mr. Fred Ciampi
Fred's Welding Service
Route 86, Box 85
Jumping Branch, WV 25969-0085

Dear Mr. Ciampi:

This responds to your letter requesting information concerning Federal requirements governing the manufacture of utility trailers. Your letter indicated that you plan to manufacture trailers.

First, please be aware that the National Highway Traffic Safety Administration (NHTSA) has authority to issue safety standards applicable to new motor vehicles and certain items of motor vehicle equipment. For purposes of this authority, trailers are considered motor vehicles. NHTSA does not approve motor vehicles or equipment, nor does the agency endorse any commercial products. Instead, the National Traffic and Motor Vehicle Safety Act establishes a certification process under which each manufacturer must certify that its product meets agency safety standards, or other applicable standards. Periodically, NHTSA tests whether vehicles or equipment comply with these standards, and may investigate alleged safety-related product defects.

The following Federal safety standards apply to trailers: Safety Standard No. 108, Lamps, Reflective Devices and Associated Equipment, Safety Standard No. 115, Vehicle identification Number--Basic Requirements, and Safety Standard No. 119, New Pneumatic Tires for Vehicles Other Than Passenger Cars. The content requirements for the vehicle identification number are found at 49 CFR Part 565. In addition, depending on the type of braking system used, trailers must meet Safety Standard No. 106, Brake Hoses, Safety Standard No. 116, Motor Vehicle Brake Fluids, and Safety Standard No. 121, Air Brake Systems. All of these standards are found in 49 CFR Part 571.

In addition, as a manufacturer of motor vehicles, you would be required to submit identification information to this agency in accordance with 49 CFR Part 566, Manufacturer Identification. You would also be required to certify that each trailer complies with all applicable Federal safety standards. This certification procedure is set out in 49 CFR Part 567. You may find a copy of 49 CFR at a Federal Depository Library in your State. If you so choose, you may purchase a copy of Title 49 from the United States Government Printing Office (GPO), Washington, D.C. 20402, (202) 783-3238. With respect to laws governing trailer manufacture, the principal statute is the National Traffic and Motor Vehicle Safety Act. You may obtain a copy of this Act from GPO. You may wish to note especially 151 of the Act, which requires a manufacturer of a motor vehicle or motor vehicle equipment to conduct notice and recall campaigns if you or this agency find that your product has a safety-related defect.

There may be State regulations that apply to trailer manufacture and use. In many states, a person cannot register a new vehicle unless he or she has a statement or certificate of origin. I understand that the Recreation Vehicle Industry Association will supply a small quantity of form statements or certificates upon request. You may contact that organization by writing them at 1896 Preston White Drive, Reston, VA 22090; or calling (800) 336-0154. You may wish to contact the local Department of Transportation or Motor Vehicle Administration in the states for which you have an interest for further information on state requirements.

I hope you find this information helpful. Please do not hesitate to contact this office at (202) 366-2992 if you have specific questions.

Sincerely,

Paul Jackson Rice Chief Counsel

ref:57l d:l2/24/90