Interpretation ID: 2882o
Tek Tron, Inc.
10R Rainbow Terrace Unit E
Danvers, MA 01923
Dear Mr. Tanzella:
This responds to your letter of April 5, 1988, concerning the installation of credit card mobile telephones into taxi cabs that already have been sold to the first purchaser. You noted that you may have to cut into the back of the front seat in order to provide clearance for the phone. You asked what safety regulations would apply to this situation and whether any additional testing would be necessary.
Section 108(a)(2)(A) of the National Traffic and Motor Vehicle Safety Act (15 U.S.C. 1397(a)(2)(A); the Safety Act) provides that: "No manufacturer, distributor, dealer, or motor vehicle repair business shall knowingly render inoperative any device or element of design installed on or in a motor vehicle ... in compliance with an applicable Federal motor vehicle safety standard ... For purposes of this paragraph, the term 'motor vehicle repair business' means any person who holds himself out to the public as in the business of repairing motor vehicles or motor vehicle equipment for compensation."
Standard No. 207, Seating Systems (49 CFR 571.207; copy enclosed) sets forth minimum performance requirements for the seating systems installed in new passenger cars, such as the taxi cabs you plan to modify. Assuming that your company would be a "motor vehicle repair business" for the purposes of this contract, this statutory provision prohibits you from knowingly making any modifications that would render inoperative the taxis' compliance with any safety standards. You should be aware that by adding the telephone you will be adding weight to the seat. This change in weight may effect the general performance requirements in S4.2. Nevertheless, the "render inoperative" provision in the Safety Act does not require your company to test vehicles after installing the mobile telephone, to ensure that the vehicles continue to comply with Standard No. 207. Instead, the "render inoperative" provision in the Safety Act requires your company to carefully compare your planned installation instructions with the requirements of Standard No. 207, to determine if installing the mobile telephones in accordance with your planned installation procedures would result in the vehicles no longer complying with Standard No. 207. If it would, you will have to devise some alternative means of installing the mobile telephones in the taxis. If your planned installation procedures do not render inoperative the taxis' compliance with Standard No. 207, you may follow those procedures without violating any provisions of the Safety Act.
Sincerely,
Erika Z. Jones Chief Counsel
Enclosures ref:VSA#108#207 d:7/18/88