Interpretation ID: aiam3372
International Harvester
401 North Michigan Avenue
Chicago
IL 60611;
Dear Mr. Mulligan: This is in response to your letter of October 1, 1980, in which you as whether compliance with 49 CFR 567, Certification, will satisfy the requirements of S4.3 of Federal Motor Vehicle Safety Standard No. 115, 49 CFR 571.115.; Section 4.3 of Federal Motor Vehicle Safety Standard No. 115 require that the vehicle identification number (VIN) 'appear clearly and indelibly upon either a part of the vehicle other than the glazing that is not designed to be removed except for repair or upon a separate plate or label which is permanently affixed to such a part.' S4.3.1 requires each character to appear in a capital, sans serif typeface. In the case of passenger cars and trucks of 10,000 pounds or less GVWR, each character must have a minimum height of 4 mm. S4.4 specifies that the VIN for passenger cars and trucks of 10,000 pounds or less GVWR shall be located within the passenger compartment.; Section 567.4 of Part 567, Certification (49 CFR 567), requires tha the certification label be permanently affixed to the vehicle, and display the vehicle identification number. Consequently, for all vehicles except passenger cars and trucks of 10,000 pounds or less GVWR, compliance with S 567.4 of Part 567 would also effect compliance with S4.3 of Standard No. 115 so long as capital, sans serif typeface was used.; Sincerely, Frank Berndt, Chief Counsel